INSTALLATION/OPERATION MANUAL MR3050
UNIVERSAL MONITOR MOUNT
1.0 WARNINGS
Prior to installation and use of this product, the following WARNINGS should be observed.
1.Installation and servicing should only be done by Qualified Service Personnel and conform to all Local codes.
2.Installation shall be done in accordance with all local and national electrical and mechanical codes utilizing only approved materials.
3.Use only installation methods and materials ca- pable of supporting four (4) times the maximum specified load.
4.Use stainless steel hardware to fasten the mount to outdoor surfaces.
5.To prevent damage from water leakage when in- stalling a mount outdoors on a roof or wall, apply sealant around the bolt holes between the mount and mounting surface.
Please thoroughly familiarize yourself with the infor- mation in this manual prior to installation and opera- tion.
2.0 SCOPE
The information contained within this manual covers the MR3050 Universal Monitor Mount.
3.0 DESCRIPTION
The MR3050 is a universal monitor mount engineered to safely mount a monitor from either a ceiling or a wall. This mount was designed for use in security systems, educational institutions, churches, hospitals, and other applications requiring flexibility in monitor mounting and positioning.
The MR3050 is an adjustable mount designed for use with
3.1 RECOMMENDED MOUNTS
MRWA | Wall mount, uses six (6), 5/16" diameter |
| fasteners (not supplied) |
MRCA | Ceiling mount, uses four (4), 5/16" diam- |
| eter fasteners (not supplied) |
PELCO Manual | 1 |