MAINTENANCE & REPAIR
Your power wheelchair is designed for minimal maintenance. However, like any motorized vehicle it requires routine maintenance. To keep your
DAILY CHECKS
1.With the controller turned OFF, perform a joystick check. Make sure it is not bent or damaged and that it returns to center when you release it. Visually inspect the rubber boot around the base of the joystick for damage. Do not handle or try to repair it.
2.Visually inspect the controller harnesses. Make sure that they are not frayed, cut or have any exposed wires.
3.Inspect the battery condition meter on the controller to determine if batteries need to be charged.
WEEKLY CHECKS
1.Inspect the connections by disconnecting the controller and charger harnesses from the electronics connector housing. Look for signs of corrosion.
2.Ensure that all parts of the controller system are securely fastened to your power wheelchair. Do not overtighten any screws.
3.Check for proper tire inflation. Your power wheelchair comes with standard
4.Check the brakes. This test should be carried out on a level surface with at least three feet of clearance around your power wheelchair.
To check the brakes (Your power wheelchair may move slightly when performing this test):
BTurn on the controller and turn down the speed and response adjustment knob.
BAfter one second, check that the battery condition meter remains on.
BSlowly push the joystick forward until you hear the parking brakes click. Immediately release the joystick. You must be able to hear each parking brake operate within a few seconds of joystick release.
BRepeat this test of the brake for the back, left, and right joystick positions.
Page 18