Quantum INFMANU2788 manual Seatback Angle Adjustment, Seatback Height Adjustment

Page 22

 

I V . C O M F O R T A D J U S T M E N T S

To adjust the anti-tip wheels:

 

1.

Push the button on both sides of the anti-tip wheel

DEPTH

 

at the same time and move the anti-tip wheel up or

 

down to unlock it. See figure 20.

ADJUSTMENT

2.

Adjust the anti-tip wheel to the desired position

SCREW

 

while aligning the anti-tip wheel with the

 

 

adjustment holes.

 

3.

Ensure that both buttons lock into place. You will

 

 

hear a click when the anti-tip wheel is locked into

 

 

place.

 

4.

After installing or adjusting the anti-tip wheels,

ANGLE

 

push and pull on both anti-tip wheels to ensure

ADJUSTMENT

5.

they are properly engaged.

SCREW

Repeat for the other side.

 

Seatback Angle Adjustment

 

Your Litestream XF may be equipped with angle-

 

adjustable back canes. If your wheelchair is equipped

 

with a depth-adjustable side from, the seatback angle

 

can be adjusted to 80°-120° in 5° increments.

 

Otherwise, the seatback angle can be adjusted to 85°-

 

105° in 5° increments.

 

To adjust the seatback angle of the Litestream XF:

 

1.

Remove the drive wheel. See figure 15.

 

2.

Remove the angle adjustment screw and loosen the

 

 

depth adjustment screw. See figure 20.

 

3.

Position the back canes at the desired angle.

 

4. Reinstall the angle adjustment screw and tighten

Figure 20. Seatback Angle Adjustment (Depth-adjustable

the depth adjustment screw. See figure 20.

Side Frame Shown)

5. Repeat on the other side of the wheelchair.

 

Seatback Height Adjustment

 

You can adjust the seatback to five different heights

BACK CANE

ranging between 12-16 in. (30.48-40.64 cm) or 15-19 in.

 

(38.1-48.26 cm), depending on the back cane size. The

 

adjustment range is 4 in. (10.16 cm) in 1-in. (2.54-cm)

 

increments. See figure 21.

WASHERS

 

WARNING! If your wheelchair is

 

equipped with a transit securement

 

system, the seatback height should

 

only be adjusted by a Quantum Rehab

 

Provider or a qualified technician.

NUTS

 

To adjust the seatback height:

SCREWS

1. Remove the screws, nuts, and washers that fasten

FRAME

the back canes to each side of the frame.

2. Slide the back canes up or down to the desired

 

height.

 

3. Use the screws, nuts, and washers to refasten the

Figure 21. Seatback Height Adjustment

back canes to the frame.

 

22

www.pridemobility.com

Litestream XF

Page 21 Page 23
Image 22
Page 21 Page 23
Contents Quantum F E T Y G U I D E L I N E S Quick Reference InformationN T E N T S IIIPURCHASER’S Agreement SafetyN T R O D U C T I O N Shipping and DeliveryUnited Kingdom Australia Product Safety Symbols S a F E T YS a F E T Y General Guidelines Pre-Ride Safety CheckModifications Tire Inflation Weight LimitationsIncline Information Cornering Information Braking InformationManual Wheel Locks Public Streets and RoadwaysStationary Obstacles Steps, Curbs, etc Inclement Weather PrecautionsOutdoor Driving Surfaces Stairs and EscalatorsLift Systems/Elevation Products DoorsElevators Motor Vehicle TransportRemovable Parts Reaching and Bending TransfersPrescription Drugs/Physical Limitations Flammability PrecautionsAlcohol/Smoking I . Y O U R W H E E L C H a I R Litestream XFUnfolding Using the Litestream XFFolding To stow the Litestream XF Transporting Your Litestream XFTo fold down the back canes on the Litestream XF To operate the caster pin lock Optional Caster Pin LockOptional Transit Securement System Drive Wheel Adjustments Comfort AdjustmentsYou may need the following to make comfort Adjustments C O M F O R T a D J U S T M E N T SBracket. See figure To change the drive wheel positionWheel off. See figure To change the drive wheel heightTo adjust the depth of the Litestream XF Depth AdjustmentAnti-tip Wheel Adjustment Seatback Angle Adjustment Seatback Height AdjustmentTo remove the SFR Swing-Away Footrest SFR RemovalTo move the SFR to the side To change the SFR foot plate lengthElevating Leg Rest ELR Calf Pad Elevating Leg Rest ELR AngleTo change the ELR angle To change the ELR calf pad heightTo adjust the foot plate angle Angle Adjustable Foot PlatesTo adjust the foot plate depth Flip-up Armrest Height Adjustment Drop-in Armrest Height AdjustmentDrop-in Armrest Removal Flip-up Armrest Angle Adjustment Dual-post ArmrestsSeat Angle Dump Adjustment To adjust the dual-post armrest heightSee figure To change the seat angle Caster Wheel Removal Caster Angle AdjustmentTo change the caster angle To remove the bolt-on caster wheelPositioning Belt A R E a N D M a I N T E N a N C E Care and MaintenanceTemperature General GuidelinesMonthly Checks Cleaning and DisinfectionWeekly Checks Yearly ChecksWheel Replacement Wheel Lock AdjustmentWhen to See Your Quantum Rehab Provider for Service To adjust each scissor-style wheel lockTo adjust the seat tension Frame. See figureP E N D I X I Specification S Width See figureP E N D I X I Specification S Litestream XF Dimensions and Ground Clearance P E N D I X I I S T F H E I G H T M a T R I Litestream XF SEAT-TO-FLOOR/AXLE Plate Mounting MatrixP E N D I X I I S T F H E I G H T M a T R I Long and Short Caster Forks T E S T E S Page Product Serial #

INFMANU2788 specifications

Quantum INFMANU2788 is a state-of-the-art device that represents a significant leap forward in the realm of quantum computing and information management. This advanced system is designed to harness the power of quantum mechanics to optimize data processing, communication, and storage. With its cutting-edge technology, the INFMANU2788 is tailored to meet the needs of modern enterprises looking to leverage quantum capabilities for competitive advantage.

At its core, the INFMANU2788 operates on a hybrid quantum architecture that combines superconducting qubits with advanced classical processing units. This unique integration allows for faster execution of complex algorithms that were previously unfeasible with classical computers. The superconducting qubits are engineered to maintain coherence over extended periods, enabling the system to perform intricate calculations without significant loss of information.

One of the standout features of the Quantum INFMANU2788 is its scalability. The device boasts a modular design that allows for the easy addition of qubits, meaning organizations can expand their quantum capabilities as their needs grow. This flexibility ensures that users can efficiently manage increasing amounts of data while maintaining performance benchmarks.

In terms of connectivity, the INFMANU2788 is equipped with a state-of-the-art quantum interconnect that facilitates rapid data transmission between qubits. This advanced interconnect technology ensures low latency and high bandwidth, crucial for real-time processing applications. Furthermore, the system supports quantum entanglement, which enables parallel data processing and enhances computational power exponentially.

The Quantum INFMANU2788 also prioritizes security through quantum cryptography, a feature designed to safeguard sensitive information. By utilizing the principles of quantum mechanics, the device ensures that any attempt to intercept data communications is detectable, providing an unprecedented level of security that is essential for financial institutions, healthcare providers, and other sectors that handle sensitive information.

To support users in harnessing the full potential of quantum computing, the INFMANU2788 comes equipped with a comprehensive suite of software tools. This includes user-friendly interfaces for programming quantum algorithms, simulation environments for testing, and robust analytics capabilities to derive insights from quantum computations.

In conclusion, the Quantum INFMANU2788 is a groundbreaking innovation in quantum technology, offering unmatched performance, scalability, and security. Its advanced features, coupled with its transformative potential, make it an indispensable tool for organizations seeking to lead in the age of quantum computing. As industries continue to explore the capabilities of quantum technologies, the INFMANU2788 positions itself at the forefront, ready to shape the future of data management and computational processes.
Top Page Image Contents