Pride Mobility Jazzy 600 XL owner manual Multi-Axis Foot Plates, To change leg rest length a

	V . C O M F O R T A D J U S T M E N T S
Multi-Axis Foot Plates
The multi-axis foot plate assembly can be installed on either
a swing-away footrest or an elevating leg rest. The multi-
axis foot plate has four adjustments: leg rest length (A), po-
sition (B), tilt (C), and angle (D). See figure 23.
To change leg rest length (A):
1.	Remove the hardware.	A
2.	Move the leg rest to the desired position.
		B
3.	Reinstall the hardware.
To change foot plate position (B):		C
1.	Remove the hardware.
		D
2.	Move the foot plate to the desired position.
3.	Reinstall the hardware.
To change foot plate tilt (C):
1.	Loosen the hardware.
2.	Tilt the foot plate to the desired position.	A
3.	Tighten the hardware.
To change foot plate angle (D):
1.	Turn the setscrew clockwise to decrease the angle.
2.	Turn the setscrew counterclockwise to increase the
	angle.
		B
		C
		D
		SETSCREW LOCATION
		Figure 23. Multi-Axis Foot Plate (ELR Shown)

Jazzy 600 XL www.pridemobility.com 27