PROCEDURE 2 | ARMS |
|
|
A R M S
This Procedure Includes the Following:
Adjusting Armrest Height - Adjustable Height Arms Only
Removing or Replacing Armrest Using or Replacing
WARNING
AfterANYadjustments,repairorserviceandBEFORE use, make sure all attaching hardware is tightened securely - otherwise injury or damage may result.
ADJUSTING ARMREST HEIGHT - ADJUSTABLE HEIGHT ARMS ONLY
Wheelchairs Equipped With Height Adjustment Levers (FIGURE 1)
WARNING
Make sure the armrest is securely locked BEFORE using the wheelchair.
1.Unlock the armrest by flipping the height adjustment lever on the top front of the armrest to the UP (HORI- ZONTAL) position.
2.Adjust armrest to desired height.
NOTE: Height adjustment lever MUST be in the unlocked position when placing armrest into the arm assembly.
3.Lock the armrest by pressing the height adjust- ment lever into the DOWN (VERTICAL) position when the desired armrest height is achieved.
Locked (Vertical)
Whelchairs Equipped With Height Adjustment Knobs (FIGURE 2)
WARNING
Make sure the height adjustment knob is in the locked position before using the wheelchair.
1.Unlock the armrest by pulling the height adjustment knob on the front of the armrest and twisting it 1/4- turn into the UNLOCKED position (FIGURE 1).
2.Adjust armrest to one (1) of four (4) OR five (5) posi- tions (depending on model type).
3.Lock the armrest by pulling the height adjustment knob on the rear of the armrest and twisting it
4.Repeat STEPS
Height
ArmrestAdjustment
Lock
Knob
| Height Adjustment |
| Lock Knob |
Pull | Pull |
and | and |
Turn to | Turn to |
Lock | Unlock |
UNLOCKED LOCKED
POSITION POSITION
Height Adjustment Lever
FIGURE 2 - ADJUSTING ARMREST HEIGHT -
ADJUSTABLE HEIGHT ARMS ONLY - WHEEL-
Unlocked (Horizontal) CHAIRS EQUIPPED WITH HEIGHT ADJUST-
MENT KNOBS
FIGURE 1 - ADJUSTING ARMREST HEIGHT - ADJUST-
ABLE HEIGHT ARMS ONLY - WHEELCHAIRS
EQUIPPED WITH HEIGHT ADJUSTMENT LEVERS
18