Invacare Lightweight manual Reaching, Leaning and Bending Forward, Reaching and Leaning Backwards

SECTION 2—SAFETY/HANDLING OF WHEELCHAIRS

Reaching, Leaning and Bending Forward

WARNING

DO NOT attempt to reach objects if you have to move forward in the seat or pick them up from the floor by reaching down between your knees.

NOTE: For this procedure, refer to

FIGURE 2.1.

Position the front casters so that they are extended as far forward as possible and engage wheel locks.

FIGURE 2.1 Reaching, Leaning and Bending

Forward

Reaching and Leaning Backwards

WARNING

DO NOT lean over the top of the back upholstery to reach objects behind you, as this may cause the wheelchair to tip over.

NOTE: For this procedure, refer to

FIGURE 2.2.

Position wheelchair as close as possible to
the desired object. Point front casters
forward to create the longest possible
wheelbase. Reach back only as far as your	FIGURE 2.2 Reaching and Leaning
arm will extend without changing your	Backwards
sitting position.

Tipping

WARNING

DO NOT tip the wheelchair without assistance.

When tipping the wheelchair, an assistant should grasp the back of the wheelchair on a non-removable (non-detachable) part. Inform the wheelchair occupant before tipping the wheelchair and remind him/her to lean back. Be sure the occupant’s feet and hands are clear of all wheels and/or pinch points.

Lightweight, Standard and Heavy Duty Wheelchairs 20 Part No. 1114811