Invacare Lightweight manual Troubleshooting, Inspect/Adjust Periodically

SECTION 3—SAFETY INSPECTION/TROUBLESHOOTING

Inspect/Adjust Periodically

❑Ensure that the wheelchair rolls straight (no excessive drag or pull to one side).

❑Inspect for loose/missing/broken hardware in all locations.

❑Inspect frame and crossbraces for loose or missing hardware.

❑Inspect for bent frame or crossbraces.

❑Check that wheel locks are easy to engage.

❑Inspect seat and backs for rips and sagging.

❑Check that there is no excessive side movement or binding in the rear wheels when lifted and spun.

❑Inspect rear wheels for cracks and wear (hub and rim).

❑Inspect rear wheels for cracked, bent or broken spokes.

❑Inspect handrims for signs of rough edges or peeling.

❑Adjust front casters/forks bearing system if wheel wobbles noticeably or binds to a stop.

❑Ensure wheel bearings are clean and free of moisture.

❑Inspect casters for cracks and wear (hub and rim).

❑Ensure that casters are free of debris.

❑Clean upholstery and armrests.

❑Check front riggings for rough/sharp edges and wear.

❑Check that all labels are present and legible. Replace if necessary.

Troubleshooting

Chair	Chair 3	Sluggish Turn or	Casters	Squeaks	Looseness	Solutions
Veers	Wheels	Performance	Flutter	and	in
Right/				Rattles	Chair
Left
						If pneumatic, check
						tires for correct and
X	X	X	X			equal pressure
						Check for loose stem
X		X	X	X	X	nuts and bolts.

Lightweight, Standard and Heavy Duty Wheelchairs 28 Part No. 1114811