Invacare 1163141 user manual Installing the Seat Positioning Strap

Page 40

7 SEAT AND ARMS

7.8Installing the Seat Positioning Strap

For this procedure, refer to FIGURE 7.8.

1.Locate the mounting bracket (Detail “A”) under the rear of the seat.

2.Secure one side of the seat positioning strap to the mounting bracket using the bolt and nut (Detail “B”).

The nut should go towards the center of the scooter.

3.Repeat STEPS 1-2 on the opposite side of the seat with the remaining side of the seat positioning strap.

Seat

DETAIL “C” - SEAT POSITIONING Seat STRAP INSTALLED

Positioning

Strap

DETAIL “A” -

BRACKET

Bracket

DETAIL “B” - HARDWARE

Nut

Bolt

 

 

Seat Positioning

 

Strap

FIGURE 7.8 Installing the Seat Positioning Strap

Invacare® Leo™ Scooter

40

Part No. 1163141

Image 40
Contents Invacare Leo Contents Tiller Adjustment Symbols GeneralLimited Warranty Safety General GuidelinesDriving Operation Information SetupTransport Stairways and Escalators Repair or Service Information Safety/Handling of Powered ScootersSafety Safety Storage Rain TestWeight Training BatteryElectrical and Grounding Weight Limitation DisposalEMI Information Electromagnetic Interference EMI From Radio Wave SourcesPowered Wheelchair Electromagnetic Interference EMI Safety Product Labeling Serial Number LabelProduct Labeling Technical Data Typical Product Parameters Overall DimensionsSeat Dimensions Arm DimensionsWeight Safety Inspection Checklists InspectionInspect/Adjust Initially Inspect/Adjust WeeklyInspect/Adjust Monthly Inspect/Adjust PeriodicallyOperating the Powered Scooter Battery Charge DisplayControl Panel Status DisplayRight and Left Direction Indicator Buttons Speed Control KnobHorn Button LightingControl Panel Operating the Scooter Operating the Powered Scooter Detail a KEY Engaging/Disengaging the Brake Release LeverPull Back to Engage Drive Push Forward to Disengage Push Engaging/Disengaging the Brake Release LeverActivating/Deactivating the Audible Signals  For this procedure, refer to FigureAudible Signal Keystroke LIT Leds Condition Combination LED NumbersRemoving/Installing the Seat InstallingSeat and Arms RemovingRemoving/Installing the Seat Adjusting Seat Height Detail a TOP Shroud Adjusting 90 Seat Swivel Adjusting 90 Seat SwivelAdjusting the Seat Position Forward/Rearward Adjusting the Arm WidthAdjusting Armrest Angle Replacing Armrest PadInstalling the Seat Positioning Strap Detail C Seat Positioning Seat Strap InstalledTiller Adjustment Adjusting the Tiller AngleRemoving/Installing the Drive Wheels Wheels and CastersRemoving/Installing the Front Wheels Four Wheel Models Removing/Installing the Front Wheels Three Wheel Models Removing/Installing the Front Wheels Four Wheel ModelsRemoving/Installing the Front Wheels Three Wheel Models Batteries Recommended Battery Type Recommended Battery TypeRemoving/Installing the Batteries  Orient the batteries as shown in Detail B of FigureDetail a Preparing to Remove Batteries Charging the Batteries Detail a Transporting Transporting the ScooterDisassembling Rear Rear ScooterAssembling Maintenance Suggested Maintenance ProceduresTroubleshooting General TroubleshootingIndicator Error Codes on Service Indicator Error Codes  For the following table, refer to .1 onInvacare Leo Scooter Invacare Leo Scooter USA