9 WHEELS AND CASTERS
Front Wheel
Front Axle | Washer |
|
Locknut
Cap
FIGURE 9.2 Removing/Installing the Front Wheels - Four Wheel Models
9.3Removing/Installing the Front Wheels - Three Wheel Models
For this procedure, refer to FIGURE 9.3.
Take note of position and orientation of wheel and mounting hardware before removing.
Removing
1.Turn power off and remove the key from the ignition.
2.Place the front of the powered scooter up on blocks so that the front wheels are off the ground.
3.Remove the bolt, axle, washer, nut and two spacers that secure the wheel to the fork.
4.Remove the wheel from the fork.
Installing
1.Use the bolt, axle, washer, nut and two spacers to secure the wheel to the fork.
2.Securely tighten the front wheel mounting hardware.
Invacare® Leo™ Scooter | 44 | Part No. 1163141 |