6 OPERATING THE POWERED SCOOTER
Activating/Deactivating the Audible Signals
For this procedure, refer to FIGURE 6.3.
The scooter system emits an audible signal in the following situations:
•Low Battery Capacity
•Direction Indicators in Use
•Hazard Lamps in Use
The audible signals can be activated or deactivated by pressing the buttons on the control panel in a particular combination keystrokes.
1.Turn the key to the Off position.
2.Press and hold the buttons on the control panel in the keystroke combination shown in the table in FIGURE 6.3.
3.Turn the key to the On position.
4.Wait two seconds until the appropriate blink code is displayed on the battery charge display, then release the buttons.
DO NOT hold the buttons for more than 5 seconds.
If LED 7 blinks five times the audible signal has been successfully activated. The scooter will return to normal operating status automatically.
Part No. 1163141 | 31 | Invacare® Leo™ Scooter |