12 MAINTENANCE
12 Maintenance
WARNING
After any adjustments, repair or service and before use, make sure that all attaching hardware is tightened securely - otherwise, injury or damage may occur.
Before performing any maintenance, adjustment or service, turn power Off and remove key from ignition. DO NOT overtighten hardware attaching to the frame. This could cause damage to the frame.
When storing scooter for prolonged periods of time, remove batteries. Refer to Removing/Installing the Batteries on page 48. After reinstallation, always recharge batteries before use. Refer to Charging the Batteries on page 50.
Use care in storage. DO NOT allow any metallic objects to contact the exposed terminals.
CAUTION
Only use a damp cloth and gentle detergent for cleaning. DO NOT use any abrasive or scouring liquids.
12.1 Suggested Maintenance Procedures
1.Before using the powered scooter, make sure all nuts and bolts are tight. Check any parts for damage or wear and replace. Check all parts for proper adjustment.
2.Ensure that batteries are properly maintained and charged as required.
3.The wheels and tires should be checked periodically for cracks and wear, and should be replaced by a qualified technician.
4.Regularly check for loose nuts and/or bolts in the front and drive wheels. If loose, have them adjusted by a qualified technician.
5.Clean dirt, dust and grease from exposed components.
6.Periodically have the bearings of the front wheel checked to make sure they are clean and free from moisture.
Invacare® Leo™ Scooter | 54 | Part No. 1163141 |