![](/images/new-backgrounds/1229756/22975625x1.webp)
A Installing Wyse Simple Imager 2.0.2
This appendix provides the detailed procedures you must complete to install Wyse Simple Imager 2.0.2.
Pre-Installation Checklist
Before you begin installing Wyse Simple Imager, make sure you have met the requirements on this checklist for the machine to which Wyse Simple Imager will be installed:
Caution
Do not install Wyse Simple Imager on any machine which has Wyse Device
Manager software installed.
•One of the following
·Windows 2003 Server Standard/Enterprise with SP2 or later
·Windows XP Pro with SP3 or later
Caution
Virtual machine environments are not supported.
•IIS with FTP and HTTP (World Wide Web Service) must be installed, enabled, and running.
•Any inexpensive external router with DHCP enabled must be connected to the machine and both the machine and router must be isolated.
Caution
Wyse Simple Imager must be installed and used on a machine (with a connected router running DHCP) that is isolated. Do not install Wyse Simple Imager on any machine which is connected to a network.
•Any existing previous version of Wyse Simple Imager must be uninstalled.
•A single network adapter is supported. If you have two adapters, you must disable one (for example, for a laptop with a wireless adapter, you must disable the wireless adapter).
•All software firewalls and antivirus services must be stopped.
•Place the Wyse Simple Imager 2.0.2 software (found on the Conversion Software Assembly