Wyse Technology wyse vx0le conversion to thinos manual Wyse Simple Imager console

3.Select V12 in the Select Product list, and then click Add to open the Add Image dialog box.

Figure 3 Add Image dialog box

4.Use the following guidelines:

•Product - V12 is automatically entered (leave this value).

•Image Version - Enter Conversion for Image Version. This refers to the new Firmware version.

•Flash Size - This is the amount of flash memory installed in your cloud client. Flash Size can be 128, 256, 512, 1024, 2048.

NOTE: To determine the flash size of your cloud client (location of the flash size is as follows):

·V30LE: Start > Control Panel > System > System Info tab

·V50LE: Start > Control Panel > System > System Information > Identity tab

·V90LE and V90LEW: Start > Control Panel > System > Client Information >

General tab

Tip

See your cloud client documentation for help on viewing the flash size.

•Description - Enter what you want for your information. This information will help you identify the characteristics of the device for which you are using this image. IMPORTANT: Be sure to use only Alphanumeric characters (A through Z and 0 through 9), underscore (_), or spaces.

•Image File - Click Browse, navigate to the folder on your hard drive that contains the 1V12.i2d file (this is the location you selected in "Step 2: Copy the 1V12 Folder and 1V12.i2d File (on the DVD-ROM) to Correct Locations"), click on the 1V12.i2d