Wyse Technology wyse vx0le conversion to thinos manual Procedures, Verify FTP Settings

Procedures

Tip

Be sure you have completed all pre-installation requirements as described in "Pre-Installation Checklist" before you begin installing Wyse Simple Imager.

Step 1: Verify FTP Settings

1.Launch IIS (click Settings > Control Panel > Administrative Tools > Internet Information Services (IIS) Manager).

Figure 9 Launch IIS

2.In the IIS Manager screen, right-click Default FTP Site in the details pane and select Properties to open the Default FTP Site Properties dialog box.

Tip

If you cannot find the Default FTP Site option, verify that FTP services are installed (see "Pre-Installation Checklist").

Figure 10 Default FTP Site Properties

3.Click the Home Directory tab and ensure the following:

•A directory located on this computer option is selected

•Local path is C:\Inetpub\ftproot (this is the default path)

•Read, Write, and Log visits check boxes are selected

•MS-DOSoption is selected