USING THE loopHEARTM
The external microphone can also be wall mounted with the wall clip supplied.
Simply stick the wall clip to the wall in the most convenient location. Gently push the external microphone into the microphone holder.
TROUBLESHOOTING
The RED LED is flashing
•Charge the battery
The loopHEARTM keeps on switching off
•Make sure that the batteries are fully charged
You cannot hear clearly due to interference or you cannot hear at all
•.Make sure the loopHEARTM is switched on and facing you
•.Move the loopHEARTM closer to you
BATTERY USAGE:
To ensure that your loopHear is always ready for use please follow the recommendations below:
•Always switch off when not in use
•Always recharge the batteries after continuous use for more than 6 hours or when the red LED is ON
•Recharge the batteries every four months if the unit has been switched OFF for long periods of time
As a rough guide the battery will allow the following usage depending on the volume levels and ambient noise:
• STANDBY WHEN TURNED OFF | 4 | |
• | MONTHS |
|
STANDBY WHEN TURNED ON BUT NOT IN USE | 2 DAYS | |
• | IN CONTINUOUS USE | 8 |
| HOURS FROM FULLY CHARGED BATTERY |
|
11 | 12 |