TROUBLESHOOTING TIPS
PROBLEM | CAUSE AND SOLUTION | |
|
| |
Low Battery Indicator | Check the battery installation for proper placement | |
No power | of the battery polarities. | |
No display appears on the unit | Replace all four worn batteries. | |
|
| |
| The memory data is being updated. (“ ” appears | |
Measurement does not start. | in the lower area of the display.) | |
| Wait one minute, then try again. | |
|
| |
| If you take a measurement when the date will | |
| change during the course of the measurement, it | |
Measurement results are slow to appear. | may take longer than normal for the measurement | |
results to be displayed. (“ ” appears in the lower | ||
| ||
| area of the display.) | |
| Wait for the results to be displayed. | |
|
| |
The weight value is displayed abnormally low or | Place the monitor on a hard and level floor. | |
high. | ||
| ||
|
| |
The Body Composition value is displayed | Refer to RECOMMENDED MEASUREMENT | |
TIMES on pages 12 and 13. | ||
abnormally low or high. | ||
Check the settings entered for your personal data. | ||
| ||
|
| |
| Remove the batteries. Wait one minute. | |
Other conditions | Reinstall the batteries. Refer to BATTERY | |
| INSTALLATION on page 17. | |
|
|
38