Excell Precision High Precesion Counting Scale manual Indication Symbol

Page 7

EXCELL PRECISION CO., LTD.

INDICATION SYMBOL “3”

1.	T	: Showing after deduction of package weight (Tare).

2.→0← : Showing the scale is in zero position.

3.M+ : Accumulation.

4.Stable : Showing the scale is in stable condition.

5.	.	: If the sample weight is too small, the sign “ 3 ” will appear. In other words, the sample
	. .

. . .

. . . .

should be added until the sign “ 3 ” disappear.

6.Pcs : If the unit weight of the object is too small, the sign “ 3 ” will appear. Under this status, the scale can still work but may result a deviation of the accuracy.

5

Image 7

Contents ZSME200000007 Page Features Table of Content Instructions for USE Before Using the Scale Preparing to USE the Scale Introduction FeaturesQuantity 6 digits Explanation of DisplayScale with TWO Weighing Units Scale with ONE Weighing UnitShowing after deduction of package weight Tare Indication SymbolPST KEY FunctionHigh Precision Counting Scale Standard Counting Scale10. + LOW Battery Warming Power SupplyAlternative Power Supplies Power ConsumptionMachine on OperationMachine OFF Scale with TWO Weighing Units How to preset the unit weightScale with ONE Weighing Unit How to recall the preset unit weight Counting Unit weight of the object to be weighed is unknownPress Key Standard Counting Scale Unit weight of the object to be weighed is knownKey can recall the latest weight value of 1000 pcs High Precision Counting ScaleWeight of the container is unknown Tare Deduction of Package Weight1Setting 0 for the form of pre-tare Weight of the container is known Pre-Tare2Setting 1 for the form of pre-tare Put object on the platter AccumulationQuantity CHECK-WEIGHING Setting Maximum Limit of QuantityCHECK-WEIGHING Setting Maximum Limit of WeightZero Function Clearing Maximum Limit of Quantity or WeightBacklight Function Recall the Orginal Values of Calibration Auto CalibrationSet the appearance User Interface SettingFunction Set the form of pre-tare function Set the form Set the action Set the next action Function How to set the speed of sampling and zero range High precision counting scale External resolution 1/15000 Appendix Specification TableStandard counting scale External resolution 1/6000 Capacity Division Minimum ResolutionExternal resolution 1/30000