Excell Precision High Precesion Counting Scale manual Operation, Machine on, Machine OFF

Page 11

EXCELL PRECISION CO., LTD.

CHAPTER 2 OPERATION

2-1 MACHINE ON

Turn on machine by pressing ON/OFF power switch. Then, the display will count down and revert to zero.

FIf the machine is equipped with “PRINTER & RS232” options, the display will appear the card no. and revert to zero.

2-2 MACHINE OFF

Turn off machine by pressing ON/OFF power switch.

FThe “High Precision Counting Scale” can also be switched standby key ( ).

	T
Please press	key until display appears “	” if you don‘t use the scale for a short

while. In this way, the machine can be kept in a warm-up condition. When you continue to use

the scale, press	T				key once more, the scale will be on again.

«Use the standby key only let you save warm-up time before operation. But please be reminded that the power is still in the consumption when you press “standby” key. If you don’t use the scale for a long period of time, you’d better to turn the main power off by the ON / OFF switch.

9

Image 11

Contents ZSME200000007 Page Features Table of ContentPreparing to USE the Scale Before Using the ScaleInstructions for USE Introduction FeaturesQuantity 6 digits Explanation of DisplayScale with TWO Weighing Units Scale with ONE Weighing UnitShowing after deduction of package weight Tare Indication Symbol PST KEY Function High Precision Counting Scale Standard Counting Scale10. + LOW Battery Warming Power SupplyAlternative Power Supplies Power ConsumptionMachine OFF OperationMachine on Scale with ONE Weighing Unit How to preset the unit weightScale with TWO Weighing Units How to recall the preset unit weight Press Key Unit weight of the object to be weighed is unknownCounting Standard Counting Scale Unit weight of the object to be weighed is knownKey can recall the latest weight value of 1000 pcs High Precision Counting ScaleWeight of the container is unknown Tare Deduction of Package Weight1Setting 0 for the form of pre-tare Weight of the container is known Pre-Tare2Setting 1 for the form of pre-tare Put object on the platter AccumulationQuantity CHECK-WEIGHING Setting Maximum Limit of QuantityCHECK-WEIGHING Setting Maximum Limit of WeightBacklight Function Clearing Maximum Limit of Quantity or WeightZero Function Recall the Orginal Values of Calibration Auto CalibrationFunction User Interface SettingSet the appearance Set the form of pre-tare function Set the form Set the action Set the next action Function How to set the speed of sampling and zero range High precision counting scale External resolution 1/15000 Appendix Specification TableStandard counting scale External resolution 1/6000 Capacity Division Minimum ResolutionExternal resolution 1/30000