A&D SK-2000WP, SK-20KWP, SK-10KWP, SK-1000WP, SK-30KWP, SK-5001WP, SK-5000WP manual Safety Precautions

Page 2

SAFETY PRECAUTIONS

All safety messages are identified by the following, “WARNING” or “CAUTION”, of ANSI Z535.4 (American National Standard Institute: Product Safety Signs and Labels). The meanings are as follows:

WARNING

A potentially hazardous situation which, if not

avoided, could result in death or serious injury.

CAUTION

A potentially hazardous situation which, if not

avoided, may result in minor or moderate injury.

This manual is subject to change without notice at any time to improve the product.

Product specifications are subject to change without any obligation on the part of the manufacturer.

When using the SK-WP, the following safety precautions should always be followed.

WARNING Use only the specified AC adapter for the scale. Other adapters may cause damage. (AC adapter is optional.)

Internal service or adjustment to this product should be performed by a qualified person.

CAUTION Avoid installing the scale in direct sunlight, which may cause discoloration or malfunctions.

Do not mix battery types, or new and old batteries. Replace with all new batteries at the same time.

If the scale is not to be used for a long period of time, remove all batteries from the battery compartment to avoid leakage.

Avoid overloading to the scale.

Avoid using the weighing platform to move the scale, as that could cause damage to the scale.

Avoid chemical solvents. Clean the scale with water.

When the scale is used with an AC adapter, the scale does not conform to IP65 protection.

IP65

Degrees of protection against water: Protected against water jets.

Degrees of protection against solid foreign objects: Dust-tight.

International Protection of IEC529. - 1 -

Image 2
Contents SK-10KWP SK-20KWP SK-30KWP Safety Precautions Parts Description DisplayPreparation Installing Batteries / Connecting the AC AdapterSetting up the Scale Before Weighing Weighing ProceduresWeighing Calibration When to CalibrateCalibration Using a Calibration Weight Set the new value Calibration by Gravity CompensationSelect a digit to be changed Save the value in memorySpecifications Value of Gravity at Various LocationsWorld Map 95131 U.S.A