Sony CPD-300SFT manual Table of Contents, Introduction, Precautions

Table of Contents

Introduction	3	Power Saving Function	10
Precautions	3	Plug and Play	10
Getting Started	4	Use of the Tilt-Swivel	10
Using Your Monitor	5	Damper Wire	10
Adjustments	6	Specifications	11
Entering New Timings	10	Troubleshooting	11

Introduction

Congratulations on your purchase of a Sony Multiscan SF series monitor!

This monitor incorporates over 25 years of Sony experience with Trinitron display technology, ensuring excellent performance and outstanding reliability.

The advanced design of the SF series together with Digital Multiscan Technology allows it to sync to any video mode within its wide scan range. In addition, its three factory

preset color modes and one user adjustable color mode give you unprecedented flexibility in matching on-screen colors to hard copy print outs. Furthermore, this monitor features digital controls with OSD (On Screen Display). It delivers easier adjustment by visualizing your control statement. All together, it delivers incredible performance with the quality and support you can expect from Sony.

Precautions

InstallationMaintenance

EN

∙Prevent internal heat build-up by allowing adequate air circulation. Do not place the unit on surfaces (rugs, blankets, etc.) nor near materials (curtains, draperies) that may block the ventilation holes.

∙Do not install the unit near heat sources such as radiators or air ducts, nor in a place subject to direct sunlight, excessive dust, mechanical vibration or shock.

∙Do not place the unit near equipment which generates magnetism, such as a converter or high voltage power lines.

∙Clean the cabinet, panel and controls with a soft cloth lightly moistened with a mild detergent solution. Do not use any type of abrasive pad, alkaline cleaner, scouring powder or solvent, such as alcohol or benzine.

∙Do not rub, touch, or tap the surface of the screen with sharp or abrasive items, like a ball point pen or a screw driver. Otherwise, this type of contact may result in a scratched picture tube.

Warning on Power Connection

∙Use a proper power cord for your local power supply.

For the customers in U.S.A.

If you do not do this, this monitor will not conform to mandatory FCC standards.

Examples of plug shape:

for 100 to 120 V AC for 220 to 240 V AC

∙Before disconnecting the power cord, wait for at least 30 seconds after turning off the power switch to allow for the discharging of static electricity on the CRT display surface.

∙After the power has been turned on, the CRT is demagnetized for approximately 5 seconds. This generates a strong magnetic field around the bezel, which may affect the data stored on magnetic tapes or disks near the bezel. Place such magnetic recording equipment and tapes/disks apart from this unit.

The socket-outlet should be installed near the equipment and be easily accessible.

3