Sony CPD-300SFT manual Getting Started, For the customers using the Windows 4

Getting Started

This monitor will sync with any IBM or compatible system equipped with VGA or greater graphics capability. Although this monitor will sync to other platforms running at horizontal frequencies between 30 and 86 kHz, including Macintosh and Power Macintosh system, a cable adapter is required. Please consult your dealer for advice on which adapter is suitable for your needs.

Step 1: With the computer switched off, attach the video signal cable to the monitor (HD15/5 BNC’s) and attach the other end to the video card.

	to HD15
IBM or Compatible
Computer	to video output
	Video signal cable
	(supplied)

HD15 - HD15 adapter (not supplied) may be required

Apple Computer	to video output
	Macintosh adapter
	(supplied)

IBM or Compatible		to
	to video output	VIDEO IN R/G/B
Computer		SYNC IN HD/VD

HD15 - HD15 adapter (not supplied)		Video signal cable
		SMF-400
may be required
Apple Computer	to video output	(sold separately)
	Macintosh adapter
	(supplied)

Notes :

∙Use a HD15 (Female) - HD15 (Male without the No.9 pin) adapter (not supplied) for any current DOS computer which is not compatible with DDC 2AB and its No.9 pin is disconnected.

∙Supplied Macintosh adapter is compatible with Macintosh LC, Performa, Quadra and Power Macintosh series computers. Macintosh II series and some older version of PowerBook models may need an adapter with micro switches.

Step 2: With the monitor switched off, attach the power cord to the monitor and the other end to the power outlet.

Power cord (supplied)

to a wall outlet

Step 3: Turn on the monitor and computer.

Step 4: Switch the input connector according to the adjustment procedure on page 9.

Step 5: If necessary, adjust the user controls according to your personal preference.

For the customers using the Windows® 4) 95

Even if you select SONY for the maker on the device select screen, the model name (CPD-300SFT) may not appear. In this case, select the DDC standard monitor.

The installation of your monitor is complete. Enjoy your monitor.

Notice

To comply with the limits of FCC Class B and IC Class B for digital device, please attach the supplied video signal cable for HD15 input or SMF-400 (sold separately) for BNC input. Furthermore, each cable has ferrite cores on it.

4