![](/images/new-backgrounds/1268032/26803215x1.webp)
Adjustments
Adjusting the Convergence
The adjustment data becomes the common setting for all input signals.
1 Press the CONV button.
The “CONVERGENCE” OSD (On Screen Display) appears.
CONVERGENCE
CONV
2 Press the ¬ /button.
The “COLOR TEMPERATURE” OSD appears.
COLOR TEMPERATURE
9300K
6500K
5000K
50
SELECT
3 Adjust with the > >/.and ¬ ?//buttons.
To select 9300K, 6500K, or 5000K
Press > >/.buttons.
023
2 For vertical adjustment Press the > >/.buttons.
>. . . to move Red up and Blue down
.. . . to move Red down and Blue up
For horizontal adjustment
Press the ¬ ?//buttons.
?. . . to move Red to the left and Blue to the right /. . . to move Red to the right and Blue to the left
To erase the “CONVERGENCE” OSD, press the CONV button again.
The “CONVERGENCE” OSD automatically disappears 10 seconds after you release the buttons.
To reset, press RESET button while the OSD is on.
Setting the Color Temperature
The selected color temperature becomes the common setting for all input signals. (The factory presetting is 9300K.)
1 Press the COLOR button.
The “COLOR TEMPERATURE/INPUT” selection OSD (On Screen Display) appears.
| COLOR TEMPERATURE | |
COLOR | INPUT: | HD1 5 BNC |
| SELECT | SET |
To obtain the desired color temperature between 5000K and 9300K
1Press the > >/.buttons to select user mode ( ).
COLOR TEMPERATURE
9300K
6500K
5000K
50
SELECT SET
2Press the ¬ ?//buttons.
?. . . for lower temperature (to be reddish) /. . . for higher temperature (to be blueish)
Your most recent adjusted color temperature will be recalled by pressing the > >/.button.
The factory presetting is 6500K for the user adjustable mode of color temperature.
To erase the “COLOR TEMPERATURE” OSD, press the COLOR button again.
The OSD automatically disappears 30 seconds after you release the buttons.
To reset, press RESET button while the OSD is on.
8