Panasonic EW3153W manual Movement detection function

Page 21

Movement detection function

If movement is detected while measurement is being taken and more

pressure is applied by the pressure cuff, the

mark will be displayed.

• Please redo blood pressure measurement again if the

mark flashes

or is lit.

 

 

•If the arm to which the pressure cuff is attached is moved while measurement is being taken (e.g. the elbow is bent suddenly), in some cases correct measurements may not be obtained.

•When movement has been detected during measurement, the mark flashes when the blood pressure reading obtained during that measurement is displayed.

(If this reading is saved, the

mark will light whenever it is recalled.)

 

 

 

 

 

 

Movement Mark

 

Explanation

 

 

 

 

Movement has been detected.

 

 

 

 

· The elbow has been bent suddenly.

 

 

 

 

· The upper arm has been tensed.

 

 

 

 

· The arm has been moved, etc.

 

 

 

 

With correct posture, please take the measurement

 

 

 

 

 

 

again after measurement has been completed (see

Flashing

page 16).

 

 

 

 

 

Movement has been detected that will significantly

 

 

 

affect the reading.

 

 

 

 

· Significant movement has been detected.

 

 

 

 

· Movement has been detected repeatedly.

 

 

 

 

· Significant arm movement has been detected, etc.

 

 

Lit

Please take the measurement again (a

will

 

 

appear on the display).

 

*This function is designed to help you to take measurements accurately (see page 33). Even if the Movement mark is not displayed, we recommend that measurements be taken 2 times, with 5 minutes between readings, in order to obtain an accurate reading (see pages 15– 18 for correct position).

English 20

Page 20 Page 22
Image 21
Page 20 Page 22
Contents Instructions English Table of Contents Basics of Blood Pressure IntroductionImportant Instructions Before Use English Precautions to Ensure Safe, Reliable Operation English Systolic Blood Pressure SBP Blood Pressure CategoriesPreparations Prior to Taking Measurements IR transmitter on both sides Connector Arm support Battery cover for main unitParts Identification Main unit View from TopAM/PM comparison button Wireless display View from BottomTurn the main unit over When Using the Main Unit with BatteriesInserting the Batteries into the Wireless Display Adjust the month Setting the time and dateAdjust the date Adjust the hourAdvice Taking a ReadingPut the main unit on a table in front of you Sit quietly and relax while taking measurements Posture to obtain accurate measurementsDo not take measurements Arm is applied Positions of the main unit and the wireless displayMeasurement Press the On/Off and Start button on the main unitRemove your arm from the main unit Movement detection function Irregular pulse function When an Error Occurs During Measurement Alarm function signals high blood pressureIf the pressure cuff comes off Press the Memory/Recall button Memory storage is completed Storing blood pressure readingsPress the Memory/Recall button Calling up readings from memoryDeleting all data stored in memory Press the button Press the Adjust button 2 to switch off the unitAfter Use Specifications Mark does not light when an arm is moved When should I measure my blood pressure? Mark was displayed, I retried the measurementIs still higher than usual Care and Maintenance Troubleshooting Display Status before error Cause and solutionSymptom Possible cause Press the ring portion on the outside One Panasonic Way 1H-1 Secaucus, NJ No.1 EN, SP 
Top Page Image Contents