Panasonic EW3153W manual Specifications

Page 30

Specifications

Power source	DC 6 V (Main unit: Four AA/LR6 size alkaline
	batteries)
	AC 120 V 60 Hz (when using AC adapter)
	DC 3 V (Wireless display: Two AA/LR6 size
	alkaline batteries)
Display	Digital LCD
Method of measurement	Oscillometric system
Measurement range	Blood pressure: 0 mmHg to 280 mmHg
	Pulse rate: 30 to 160 beats per minute
Accuracy	Blood pressure: Within ±3 mmHg
	Pulse rate: Within ±5%
Operation temperature/	10 °C to 40 °C (50 °F to 104 °F), 15% to 90%
humidity range	RH
Storage temperature/	–20 °C to 60 °C (–4 °F to 140 °F),
humidity range	10% to 95% RH
Measurable arm	Approx. 7¾ to 13⅜ (20 cm to 34 cm)
circumference
Weight	Main unit: Approx. 1550 g (54.7 oz.) (not
	including batteries)
	Wireless display: Approx. 160 g (5.6 oz.) (not
	including batteries)
Dimensions	Main unit: 11⅛ × 6⅝ × 11⅛ (28.3 cm ×
	16.9 cm × 28.1 cm)
	Wireless display: 5¾ × 3¼ × 2⅝ (14.6 cm ×
	8.4 cm × 6.8 cm)
Protection against	Internally powered equipment, Type BF
electric shock	applied part
AC adapter
Input	AC 120 V 60 Hz
Output	DC 6 V 2.0 A

29English

Image 30

Contents Instructions English Table of Contents Introduction Basics of Blood PressureImportant Instructions Before Use English Precautions to Ensure Safe, Reliable Operation English Blood Pressure Categories Systolic Blood Pressure SBPPreparations Prior to Taking Measurements Parts Identification Battery cover for main unitIR transmitter on both sides Connector Arm support Main unit View from TopWireless display View from Bottom AM/PM comparison buttonWhen Using the Main Unit with Batteries Turn the main unit overInserting the Batteries into the Wireless Display Adjust the date Setting the time and dateAdjust the month Adjust the hourAdvice Taking a ReadingPut the main unit on a table in front of you Posture to obtain accurate measurements Sit quietly and relax while taking measurementsDo not take measurements Positions of the main unit and the wireless display Arm is appliedMeasurement Press the On/Off and Start button on the main unitRemove your arm from the main unit Movement detection function Irregular pulse function Alarm function signals high blood pressure When an Error Occurs During MeasurementIf the pressure cuff comes off Storing blood pressure readings Press the Memory/Recall button Memory storage is completedCalling up readings from memory Press the Memory/Recall buttonDeleting all data stored in memory Press the Adjust button 2 to switch off the unit Press the buttonAfter Use Specifications Mark does not light when an arm is moved When should I measure my blood pressure? Mark was displayed, I retried the measurementIs still higher than usual Care and Maintenance Troubleshooting Display Status before error Cause and solutionSymptom Possible cause Press the ring portion on the outside One Panasonic Way 1H-1 Secaucus, NJ No.1 EN, SP