Balance KH 5520 manual Startup, Attaching/detaching accessories, Cleaning and care

Startup

Before starting up the appliance, make certain that ...

–the appliance and the accessories are in perfect working order,

–all packaging material has been removed.

If necessary, clean the accessories as described under “Cleaning and care”.

Attaching/detaching accessories

Caution:

After operation, the appliance components may be hot!

To attach an accessory ...
• push it onto the accessory connector		and turn
it in anti-clockwise direction until you hear it click
into place.
The arrow symbols	on the attachment and

on the accessory connector must correspond.

To detach an accessory ...

• switch off the appliance first and allow it to cool down

• Press the eject button and turn the acces- sory in clockwise direction.

The accessory can now be easily removed from the

connector .

Switching on/off / Selecting a heat level

After having attached the desired accessory and

plugged the power plug into the power socket ...

you can switch on the appliance using the switch and select the level:

"1" for low fan speed "2" for high fan speed

With the Cool-Shot button you can gene- rate a cold air flow at any fan speed. Press the

Cool-Shot button , until it engages.

You can switch off the appliance by pushing the

level switch to "0" (= appliance off).

Cleaning and care

Never open the casing of the appliance. No operating elements are located inside the device. An open housing can create the risk of a life-threatening electrical shock.

Before cleaning the device, ....

•always disconnect the power plug from the power socket

•and allow the appliance to cool down completely.

You must under no cirumstances immerse the appliance components in water or other li- quids! Danger to life by an electric shock will be caused, if residual liquids contact live parts the next time the appliance is used.

•Clean the appliance components with a dry or slightly damp cloth – and carefully dry all parts afterwards.

- 6 -