How To Get The Maximum Efficiency From Your Appliance
1.Maintain salt level at least 1/3 full; use solar salt or pellets and purchase a clean grade of salt. Use one or the other; do not mix pellet and solar salt. If potassium chloride is used in place of nugget or pellet salt, you must select the potassi- um option during the programming of the controller (see pg.
2.Allow the appliance to regenerate at a
ti me when the water is not being used. If you have more than one appliance, allow two hours between each regeneration.
3.Protect your 60 Series, including the drain line, from freezing.
4.Should dirt, sand, or large particles be present in your water supply, it is important that you consult your Hague dealer for filters that will eliminate this problem.
5.Bypass the appliance(s) if well, plumbing, or pump work is required, and turn on out- side tap until water runs clear before putting the appliance back in service.
Your 60 Series appliance my be disinfected with 5.25% sodium hypochlorite, which is the active ingredient in household bleach. To disinfect your appliance, add 4.0 fluid ounces of sodium hypochlorite solution to the brine well of the brine tank (the brine tank should have water in it to permit the solution to be carried into the appliance). Start a manual regeneration.
OPERATIONAL, MAINTENANCE, AND REPLACEMENT REQUIREMENTS ARE ESSENTIAL FOR THE PRODUCT TO PERFORM TO SPECIFICATIONS.
NOTES:
2