Thank you for choosing a Panasonic shaver ES‑LV61. With our WET/DRY technology, you can enjoy using your Panasonic shaver dry or in the shower or bath for gentle and easy shaving. Please read all instructions before use.
Important
This shaver has a
Before use
This WET/DRY shaver can be used for wet shaving using shaving lather or for dry shaving. You can use this watertight shaver in the shower and clean with water. The following symbol means suitable for use in a bath or shower.
Treat yourself to wet lather shaves for at least three weeks and notice the difference. Your Panasonic WET/DRY shaver requires a little time to get used to because your skin and beard need about a month to adjust to any new shaving method.
Using the shaver
Caution
The outer foil is very thin and can be damaged if not used correctly. Check that the foil is not damaged before using the shaver. Do not use the shaver if the foil is damaged as you will cut your skin.
•Terminate the usage when there is an abnormality or failure.
•Do not share your shaver with your family or other people. Doing so may result in infection or inflammation.
•This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.
Charging the shaver
•Never use the AC adaptor in the bathroom or shower room.
•Do not use any power cord or AC adaptor other than the AC adaptor (RE7‑59).
•Plug in the AC adaptor into a household outlet where there is no moisture and handle it with dry hands.
•Hold the AC adaptor when disconnecting it from the household outlet. If you tug on the power cord, you may damage it.
•The supply cord cannot be replaced. If the cord is damaged, the AC adaptor should be scrapped.
•The AC adaptor is intended to be correctly oriented in a vertical or floor mount position.
Cleaning the shaver
Warning
Disconnect the power cord from the shaver before cleaning it in water to prevent electric shock.
•Keep both the inner blades inserted. If only one of the inner blades is inserted, the shaver may be damaged.
•If you clean the shaver with water, do not use salt water or hot water. Do not soak the shaver in water for a long period of time.
•Clean the housing only with a soft cloth slightly dampened with tap water or soapy tap water. Do not use thinner, benzine, alcohol or other chemicals.