HE/001132 | Document No. 001132, Revision 2.0 | Page 40 of 92 |
Agfa HealthCare |
| |
NodeID Livelink : 14140190 | 14 June, 2007 | |
|
|
|
Table
Attribute Name | Tag | Value |
Image Position | (2020,0010) | 1 |
Polarity | (2020,0020) | NORMAL, REVERSE |
Basic Grayscale Image Sequence | (2020,0110) |
|
>Samples Per Pixel | (0028,0002) | 1 |
>Photometric Interpretation | (0028,0004) | MONOCHROME2 |
>Rows | (0028,0010) | larger than 0 |
>Columns | (0028,0011) | larger than 0 |
>Bits Allocated | (0028,0100) | 8 – 16 |
>Bits Stored | (0028,0101) | 8 – 16 |
>High Bit | (0028,0102) | 7 to 15 |
>Pixel Representation | (0028,0103) | 0 |
>Pixel Data | (7FE0,0010) | A data stream of the pixel samples that comprise the Image. |
"Workstation" (SCU) will process the
Table 2.2-30: N-SET Status Codes
Code | Status | Meaning |
0000 | Success | Normally returned by the SCP AE. Image successfully stored in Image Box |
B604 | Warning | Image size is larger then Image Box size, the image has been magnified. |
B605 |
| Requested Min Density or Max Density outside of printer’s operating range. The printer will |
|
| use its respective minimum or maximum density value instead. |
C603 | Error | Image size is larger then Image box size |
C605 |
| Insufficient memory in printer to store the image. |
* | Other Status | Other Dicom error codes result in the failure of the job. Other warnings are not communicated |
| codes | to the user. |
2.2.2.3.1.3.4Printer SOP Class (1.2.840.10008.5.1.1.16)
The Printer IOD is an abstraction of the hard copy printer and is the basic Information Entity to monitor the status of the printer.
The Printer SOP Instance is created by the SCP during
The Printer SOP Class is used to monitor the status of the printer.
"Workstation" (SCU) will accept the following DIMSE services:
∙N-EVENT-REPORT
"Workstation" (SCU) can send the following DIMSE services:
∙N-GET
The SCP uses the