Braun C 100 TS, C 20 S Filling the water reservoir, Setting the temperature, Switching on and off

Filling the water reservoir

ÖPull off the water reservoir $ as shown in the illustration.

ÜRemove the cap by turning it as indicated. á Fill the reservoir with tap water only.

à Replace the cap.

â Re-insert the water reservoir until it snaps into place. A full water reservoir will last for approx. 20 steam shots.

Setting the temperature

(only with models C 70 TS, C 100 TS)

By means of the temperature control you may choose a temperature setting from a range between «min» and «max». Higher temperatures are suitable for thick hair, lower temperatures for thin hair. When using the shot of steam, we recommend setting the temperature control at «max».

Switching on and off

1 To switch on the energy supply push switch up to position «1».

2Wait 3–4 seconds.

3 To start the appliance, push switch further up to the «start» position until you can clearly hear a click.

4Let the switch slide back to position «1».

5After approx. 2–3 minutes, the ready indicator turns dark. The appliance is now ready for use.

After use, always switch off (slide switch back to position «0») and make sure the water reservoir is empty.