English

Our products are engineered to meet the highest standards of quality, functionality and design. We hope you thoroughly enjoy your new Braun appliance. Carefully read the use instructions before use.

Important

•Plug your hairdryer into an alternating current () outlet only and be sure that your household voltage corresponds to the voltage marked on the hairdryer.

• This appliance must never be used near water (e.g. a filled wash basin, bathtub or shower). Do not allow the appliance to become wet.

•When using the hairdryer in a bathroom, always unplug it after use. Even a switched-off hairdryer presents a hazard if not unplugged.

•For additional protection, it is advisable to install a residual current device (RCD) with a rated residual operating current not exceeding 30 mA in the electrical circuit of your bathroom. Ask your installer for advice.

•Care should be taken not to block the inlet and outlet grill when the hairdryer is switched on.

If either grill becomes blocked, the hairdryer will automatically cut out. After cooling for a few minutes, it will switch back on automatically.

•Do not wrap the mains cord around the appliance. Regularly check the mains cord for wear or damage, particularly where it enters the product and the plug. If you have any doubt about its condition take the appliance to your nearest Braun Service Centre for checking/repair. The mains cord of the appliance may only be replaced by an authorised Braun Service Centre. Unqualified repair work can lead to extreme hazards for the user.

•This appliance is not intended for use by children or persons with reduced physical or mental capabilities, unless they are given supervision by a person responsible for their safety. In general, we recommend that you keep the appliance out of reach of children.

Description

1Switch

2Colour Saver button with light

3Cold shot button

4Protection filter

5Colour Saver nozzle

6Concentrator nozzle

7Diffuser attachment (only with SPI-C 2000 DF)

Switch (1)

Two airflow and three temperature settings allow you to personalize your hairdryer for a fast and efficient, but also gentle drying.

Airflow		Temperature
2	high	high	3
1	low	medium	2
0	off	low	1

Colour Saver Technology

Colour Saver Technology with satin ions maintains the precious health of coloured hair as it protects the hair from dry out and damage and prevents moisture loss of coloured hair while drying. For beautiful coloured hair that looks more healthy and vibrant for longer.

Colour Saver button

By sliding up the Colour Saver button (2) you can set a controlled limit to the maximum heat output of your hair dryer, regardless of the airflow setting. As a result, Satin Hair Colour Dryer prevents coloured hair from overheating, excess dry out and damage while still providing you with a powerful airflow. The light shines when the Colour Saver function is activated (a).

Colour Saver nozzle

The Colour Saver nozzle (5) blends cooler ambient air with the dryer airflow. This new and increased airflow blows a gentle breeze across a larger drying area. For fast, yet most gentle drying.

Cold shot (3)

To fix a style with cold air, press and hold the cold shot button.

Protection filter (4)

Regularly wipe the filter clean. For a thorough cleaning, remove the filter and clean it under running water.

Concentrator nozzle (6)

For precise styling use the concentrator nozzle.

Volume diffusor (7) (only with SPI-C 2000 DF)

Attaching the diffusor (b)

•Align the notches on the rim of the diffusor attachment with the slots in the hair dryer.

•Push the attachment onto the hairdryer, then turn clockwise until the bayonet lock clicks into place.

•To remove the diffusor, turn in the opposite direction and pull.

SPI-C 2000 DF specifications

The Braun SPI-C 2000 DF is a standout model in the realm of modern kitchen appliances, designed for efficiency, innovation, and user comfort. This versatile device combines state-of-the-art technology with a sleek design, making it an essential tool for both amateur and professional chefs.

One of the main features of the Braun SPI-C 2000 DF is its powerful motor, capable of delivering high performance while remaining energy-efficient. With a maximum power output of 2000 watts, the appliance provides rapid heating, allowing for quick meal preparation. This speed ensures that users can cook and serve meals without the long wait times typical of many kitchen appliances.

Incorporating advanced cooking technologies, the SPI-C 2000 DF utilizes induction cooking, which is not only faster than traditional gas and electric heating but also safer, as the cooking surface remains cool to the touch. This feature reduces the risk of burns, making it especially user-friendly for families with children. Additionally, the precision temperature control allows for accurate cooking, ensuring that ingredients are cooked evenly and to perfection, whether searing meat or simmering sauces.

The design of the Braun SPI-C 2000 DF emphasizes user convenience. It boasts a spacious cooking surface that accommodates multiple pots and pans simultaneously, maximizing cooking efficiency. The touch controls make adjusting settings intuitive and straightforward, while the digital display provides clear feedback on current cooking parameters.

Safety is another cornerstone of the SPI-C 2000 DF's design. With an automatic shut-off feature, users can cook with peace of mind, knowing that the appliance will turn off when not in use. The integrated child lock adds an extra layer of safety, preventing accidental operation.

Maintenance is also made easy with the SPI-C 2000 DF, as its non-stick cooking surface enables quick cleanup after meals. The durable construction ensures longevity, withstanding the rigors of everyday use.

Overall, the Braun SPI-C 2000 DF stands out due to its combination of power, safety, and convenience, making it a valuable addition to any kitchen. Whether whipping up a quick dinner or preparing elaborate meals for gatherings, this appliance enhances the cooking experience with its innovative technologies and thoughtful design.