Braun NL Series Horizontal bridging position, Matically travels inboard to the stowed position

WARNING

Discontinue lift use immediately if any lift component does not operate prop- erly. Failure to do so may result in serious bodily injury and/or property damage.

horizontal (bridging) position

ZKHQLWUHDFKHVYHKLFOHÁRRUOHY- el. The roll stop must overlap the lift base plate a minimum 1/2".

When the FOLD switch is pressed and the platform folds IURPÁRRUOHYHOWRWKHVWRZYHUWL- cal) position, the roll stop auto-

matically travels inboard to the stowed position.

Interlock Features: The inner roll stop features a locking mechanism that prohibits the plat- form from lowering if the lock is not engaged. The inner roll stop also senses weight to prohibit lift operation. The lift will not function if inner roll stop is occupied.

Discontinue lift operation im- mediately if the inner roll stop does not operate properly.

Outer Barrier: This cylinder-pow- ered barrier provides a ramp for wheelchair loading and unloading at ground level (see photos on following page). When the plat- form lowers fully to ground level, the cylinder compression spring

automatically unfolds (rotates) the barrier to the ramp position (fully unfolded).

Although the outer barrier is lift-powered, the activation of the barrier is controlled by the lift operator (attendant). Press- ing the DOWN switch unfolds the barrier. The outer barrier is cylinder-powered to automati- cally fold (rotate) to the vertical position as shown when the UP switch is pressed (barrier raises before platform raises).

Interlock: The outer barrier senses weight to prohibit lift op- eration. The lift will not function if the outer barrier is occupied.