![](/images/new-backgrounds/1251029/25102993x1.webp)
Maintenance and Lubrication Schedule
Perform all procedures listed in previous section also
1500
Cycles
continued
Platform pivot pin bearings (2)
Platform fold axles (2)
Inner roll stop lever bearings (2)
Inner roll stop lever slot (2)
Rotating pivot slide arm pivot pins (2)
Parallel arm pivot bearings (16)
Handrail pivot pin bearings (4)
Hydraulic cylinder bushings (8)
Inspect
Inspect inner roll stop for:
•Wear or damage
•Proper operation. Roll stop should just rest on top surface of the base plate.
•Positive securement (both ends)
Apply Light Oil - See Lubrication Diagram
Apply Light Oil - See Lubrication Diagram
Apply Light Oil - See Lubrication Diagram
Apply Light Oil - See Lubrication Diagram
Apply Light Oil - See Lubrication Diagram
Apply Light Oil - See Lubrication Diagram
Apply Light Oil - See Lubrication Diagram
Apply Light Oil - See Lubrication Diagram
Correct, replace defective parts and/or relubri- cate.
Resecure, replace or correct as needed. See Platform Angle Instructions and Microswitch Adjustment Instructions.
Page 45