Braun NL Series manual Lift Components

Page 8

Lift Components

Refer to the Lift Terminology Il- lustration on page 4.

Pump Module: The lift-mounted pump module consists of the hy- draulic pump, the manual hand pump, the electronic control board and electrical components that power the lift electric/hy- draulic systems.

Hand-held Pendant Control: The hand-held attendant's pendant control is connected to the pump module. The hand- held pendant is equipped with two rocker switches, (UNFOLD, FOLD, DOWN, and UP). The momentary switches activate the automatic lift functions.

Lift Terminology

Lift Frame: The lift frame con- sists of the base plate, threshold warning plate, towers, parallel arms, vertical arms, platform pivot arms and handrails. Two main hydraulic cylinders are housed in the parallel arms. The electrical/hydraulic powered lift frame components mechani- cally unfold, lower, raise and fold the lift platform assembly.

Platform Assembly: The plat- form assembly consists of the steel tubing frame with grating surface upon which the wheel- chair is positioned, the outer barrier, outer barrier latch, the inner roll stop, and the hydraulic cylinder assembly that powers the outer barrier.

Lift-Tite™Latches: The spring- loaded latches prevent the platform from unfolding from the stowed position in the event of platform drift. Further details regarding Lift-Tite™latches are provided on pages 16 and 17.

Outer Barrier: The cylinder- powered automatic outer barrier provides a ramp for wheelchair loading and unloading at ground level. Photos and further details regarding the outer barrier are provided in the Operation Notes section (pages 19-21).

Outer Barrier Latch: The spring- loaded latch locks the outer bar- rier in the vertical position when the platform raises above ground level.

Page 6

Page 7 Page 9
Image 8
Page 7 Page 9
Contents
Operators Manual for Congratulations Contents Warranty and Registration Instructions Series No Pump Code Model No Serial No Warranty and Registration Instructions Lift Terminology Illustration Lift Terminology IntroductionLift Components Vehicle and Lift Interlocks Lift Actions and Functions Down Platform LowerUP Platform Raise Up is the action of the platform raising Fold In Platform Fold Fold is the action of the platformLift Operation Safety Safety Symbols Safety FIRST! Know ThatLift Operation Safety Precautions RDGDQGXQORDGFOHDURIYHKLFXODUWUDIÀF Stop powered wheelchairs with the wheelchair controls May result in serious Bodily injury and/or property damageReplace missing, worn or illegible decals Never modify alter a Braun Corporation liftDo not remove any guards or covers Keep clear of any hydraulic leakOperation Notes and Details Simply press the switch labeled for the intended function Lift Features Information is not understoodDisengaged Lift-Tite Latch Latch En- gagement Pin Roller When the Unfold switch is Horizontal bridging position Matically travels inboard to the stowed positionLatch Operation Notes and Details Lift Passengers Yellow platform loading boundarOperation Notes and Details Operation Notes and Details Operation Procedure Review Wheelchair-Equipped Occupant Seat BeltsPreventive Maintenance Lift Operating Instructions Open Doors and Secure To Unfold Platform Unlock wheelchair brakes and unload passenger from platform Tioned fully inside yellow bound AriesClose Doors Nhtsa Operations Checklist 9HULÀHGManual Operating Instructions Safety Precautions Hand PumpDown To Lower To Unfold Platform OutClose hand pump valve turn clockwise To Fold Platform Using hand pump handleUp To Raise To Store Pump Handle To Install Pump Cover Decals. Call 1-800-THE Lift for replacements Decals and Antiskid30787 Available Antiskid Maintenance and Lubrication Maintenance and lubrication proce- dures must be perDE Door-Ease Lubrication Diagram Maintenance and Lubrication Schedule 750 Cycles1500 Cycles Maintenance and Lubrication Schedule 1500 4500 Cycles Consecutive Providing Access to the World Public Use Wheelchair Lifts
Top Page Image Contents