![](/images/new-backgrounds/1251029/25102995x1.webp)
Maintenance and Lubrication Schedule
continued
Perform all procedures listed in previous section also
1500
Cycles
Inspect handrail components for wear or damage, and for proper operation
Inspect microswitches for securement and proper adjustment.
Make sure lift operates smoothly
Inspect external snap rings:
•Handrail pivot pins (2 per pin)
•Platform slide/rotate pivot pins (2 per pin)
•Platform fold axles (1 per axle)
•Inner roll stop lever bracket pins
(1 per pin)
•
Replace defective parts.
Resecure, replace or adjust as needed. See Microswitch Adjustment Instructions.
Realign towers and vertical arms. Lubricate or correct as needed.
Resecure or replace if needed.
Inspect platform fold axles and bearings for wear | Replace defective parts and resecure as needed. |
or damage and positive securement | Apply Light Oil. |
Page 46