28ENGLISH
Cleaning the Shaving Unit in the Jet Clean System (1280XCC and 1250XCC)
CAUTION: Keep cleaning solution out of reach of children. Do not take internally. Avoid contact with eyes. In case of eye contact, thoroughly flush with cold water. If irritation persists, get medical attention.
Important
◗Only use this razor, charging stand, Jet Clean System and HQ200 cleaning solution provided to charge or clean razor.
◗Other Philips Norelco razors DO NOT work with this Jet Clean System.
◗Empty the cleaning solution canister and thoroughly rinse the canister clean with warm water every 2 weeks.
◗The Jet Clean System thoroughly cleans but does not disinfect your razor, therefore, do not share razor with others.
◗The charging plug converts
◗Place the Jet Clean System on a flat, stable and
◗To avoid evaporation, do not expose cleaning solution to direct sunlight.
◗Remove the protective razor head cap from the razor before charging or cleaning the razor in the Jet Clean System.
ENGLISH 29
◗Use this appliance for its intended household use as described in this manual.
1Place the Jet Clean System on a flat, level surface.
C 2 Simultaneously press the buttons located on both sides of the Jet Clean System (1) and lift the appliance off the Jet Clean canister (2).
Always remove appliance from canister by lifting straight up. Do not tilt Jet Clean System.
3Unscrew the lid on the Jet Clean Solution bottle (Model HQ200) provided with the razor. Remove the airtight seal by lifting up the tabs on the seal.
C4 Pour the Jet Clean Solution into the canister
up to a level between the two lines located inside the canister.
NOTE: ONLY USE PHILIPS NORELCO JET
CLEAN SOLUTION (MODEL HQ200) WITH
THE JET CLEAN SYSTEM. ANY OTHER
SOLUTION MAY CAUSE DAMAGE TO YOUR
RAZOR.
C ◗ When the cleaning solution level drops below the minimum level, the ‘cleaning chamber empty’ symbol will blink and the razor holder will move to the starting position.