30ENGLISH
◗If you clean your razor every day, you should clean and refill the canister approximately every 15 days.
C5 Carefully lower the appliance back onto
the Jet Clean canister making sure the release buttons snap back into place.
When the canister is filled with cleaning solution, do not move appliance to prevent leakage.
Jet Cleaning the Razor
◗If the razor does not contain enough power for one (1) shave, the Jet Clean Cleaning System may not work properly. Charge the razor in the Jet Clean System before using the Jet Clean System to clean your razor.
◗If you use the razor with shaving foam, quickly rinse under hot water before cleaning in the Jet Clean System.
1Connect the small plug to the Jet Clean System. Connect the charging plug into any 100V to 240V AC outlet. Use only the charging plug provided.
2. Place the Jet Clean System on a flat, level surface. Fill the canister with cleaning solution (see ‘Preparing Jet Clean System For Use’).
ENGLISH 31
C 3 Remove protective razor head cap from razor.
C 4 Place the razor head side down in the razor holder with the display facing the front of the Jet Clean System.
C5 Press the razor tightly into the holder of
the Jet Clean System to lock into cleaning cycle position.
The display on the razor will indicate razor is charging.
6Model 1280XCC only, press the up/down button to select a cleaning program.
You can choose from 3 cleaning programs: eco program, auto program and intensive program.
NOTE:The eco program has a shorter drying time and the intensive program is a more thorough cleaning program.
7Press the ON/OFF button to start the cleaning cycle.
Model 1250XCC only, the system begins the automatic cleaning program.