Philips GC2030 manual Setting the temperature, Put the iron on its heel

ENGLISH 5

C 4 Pour tap water into the water tank by means of the filling jug and fill the tank to maximum level.

Do not fill the water tank beyond the MAX indication.

If the tap water in your area is very hard, we advise you to use distilled water.

Do not use vinegar, starch or chemically descaled water.

Setting the temperature

C

			LYN
			NO
			N
			OLY
			N
S	S
I
L	O
K E
	I
WA						I N				N
	L				L				E
	I							N
	ON						I
	O	E				L
	L			N
			O		N
			COT
				O
			T
			COT

1Put the iron on its heel.

2Set the temperature dial to the required ironing temperature by turning it to the position of the temperature indicator.

-Check the garment label for the required ironing temperature.

-1 Synthetic fabrics (e.g. acrylic, viscose, polyamide, polyester)

-1 Silk

-2 Wool

-3 Cotton, linen

-If you do not know what kind of fabric(s) a garment is made of, determine the right ironing temperature by ironing a part that will be invisible when you wear the garment.

-Silk, woollen and synthetic materials: iron the reverse side of the fabric to prevent shiny patches.To prevent stains, avoid using the spray function.

-Start ironing the articles that require the lowest ironing temperature, such as those made of synthetic fibres.

3Put the mains plug in an earthed wall socket.

4When the amber temperature pilot light has gone out, wait a

while before you start ironing.

BThe amber pilot light will come on from time to time during ironing.

For auto-shut-off versions (only type GC2030):

If the auto-shut-off function has been activated (red pilot light blinks), move the iron slightly to deactivate it (red pilot light stops blinking).