Oregon Scientific EW92 Reception of Radio Controlled Time Signal, Signal Reception Indicator

EN

RECEPTION OF RADIO CONTROLLED TIME SIGNAL

The time and calendar are radio-controlled. The current time and calendar are automatically synchronized with time signal transmitted from Germany/England.

When used for the first time (after inserting batteries or pressing “RESET” key), and then after 5 minutes, the clock will start to receive the time signal. The signal reception indicator will be flashing for 7 minutes.

SIGNAL RECEPTION INDICATOR

The wave segment flashing means time signals are being received. The signal quality could be classified into 3 types:

No signal Weak signal Excellent signal

Note

1.The unit will automatically search for the time signal at 2:00 (3:00 or 4:00 is also available if the signal is not received at 2:00), 8:00, 14:00 and 20:00 each day.

2.Always place the unit away from interfering

sources such as TV set, computer, etc.

3.Avoid placing the unit on or next to metal plates.

4.Closed area such as airport, basement, tower block or factory is not recommended.

5.Do not start reception in moving articles such as vehicles or trains.

TIME AND CALENDAR MANUAL SETTING

If you are out of reach of the Radio Controlled sensor or if the reception is not reachable, the time and calendar can be set manually. As soon as the signal of sensor is received again, the clock will automatically synchronize with the exact time and calendar.

1.In normal time mode, press “SET CLOCK” key once to enter the time setting mode.

2.Press “+/CHANNEL” or “-/MIN.MAX.” key to change the settings.

3.Press “SET CLOCK” to confirm. The setting order is: 12/24-hr format, time, +/-23 hours time difference, year, day/month format, date.

4.Press “SET CLOCK” key to save and exit the setting mode.

6