La Crosse Technology WT-62U II. Function Keys, II or 24 Hour Time Setting, III. Time Zone Setting

Page 11

II. FUNCTION KEYS

The function keys are operated by pressing the key corresponding to the operation that you want to perform.

II. 12 OR 24 HOUR TIME SETTING

1. Press and hold the “SET” button for 3 seconds or until “12 h” flashes in the DATE LCD.

2. Press and release the “CH” button to toggle between 12 and 24-hour time.

3.Press and release the “SET” button to confirm the 12/24-hour setting and to advance to Time Zone Setting.

III.TIME ZONE SETTING

The default time zone is EST, “Zo -5” (Eastern Standard Time), to change this setting:

1.Press and hold the “SET” button for 3 seconds or until “12 h” OR “24 h” flashes in the

DATE LCD.

2. Press and release the “SET” button 1 more time to enter the Time Zone setting mode.

3. The default Time Zone “Zo- 5” will flash in the DATE LCD.

8

Image 11
Contents WT-62U Digital Window Thermometer Installation Warranty Information WS-9013U Wireless 433 MHz Radio-controlled Weather Station Contents Inventory of Contents About Wwvb Radio Controlled Time Do not Press ANY Buttons for 15 Minutes Quick SET-UP GuideIndoor Weather Station Programming Sequence Program ModeII. Function Keys II or 24 Hour Time SettingIII. Time Zone Setting GMT IV. Daylight Saving Time DST SettingTime Manual Time SettingVI. Setting the DAY, DATE, and Year VII. Selecting F or C VIII. Setting the LCD Contrast II. Outdoor Temperature Features of the WS-9013UIndoor Temperature Viewing the Outdoor Temperature Records III. Minimum and Maximum Temperature RecordsViewing the Indoor Temperature Records SET-UP of Multiple Units Resetting the Mimimum and Maximum RecordsIV. Adding Outdoor Remote Control Senders Optional Outdoor LCD Mounting with Adhesive Tape Mounting Remote Temperature SensorMounting with Screws Wall Mounting II. the Indoor Temperature StationUsing the Table Stand Maintenance and Care Instructions TroubleshootingTemperature measuring range SpecificationsWarranty Information FCC ID OMO-01RX receiver, OMO-01TX sensor