La Crosse Technology WT-62U specifications VII. Selecting F or C

Page 15

5.The numeric-month will be flashing in the DATE LCD. Press and release the “CH” button to select to the current month.

6.Press and release the “SET” button to confirm the numeric- month, and to enter the numeric-day setting mode.

7.The numeric-day will be flashing, press and release the “CH”

button to select the current day.

8. Press and release the “SET” button to confirm and to enter the year setting mode.

9. The default-year will be flashing, press and release the “CH” to select the appropriate year.

10.Press and release the “SET” button to confirm and to advance to the °F or °C setting mode.

VII. SELECTING °F OR °C

1.Press and hold the “SET” button for 3 seconds, or until “12h” or “24h” flashes in the DATE LCD.

2.Press and release the “SET” button 9 times to reach the °F or °C setting mode.

3.“°F” is the default setting, and

should be flashing in the

DATE LCD. 4. Press and release the “CH”

button to shift °F to °C and

back. 7. Press and release the “SET”

button to confirm your

selection and to advance to the LCD contrast setting.

12

Image 15
Contents WT-62U Digital Window Thermometer Installation Warranty Information WS-9013U Wireless 433 MHz Radio-controlled Weather Station Contents Inventory of Contents About Wwvb Radio Controlled Time Do not Press ANY Buttons for 15 Minutes Quick SET-UP GuideIndoor Weather Station Programming Sequence Program ModeII or 24 Hour Time Setting III. Time Zone SettingII. Function Keys GMT IV. Daylight Saving Time DST SettingTime Manual Time SettingVI. Setting the DAY, DATE, and Year VII. Selecting F or C VIII. Setting the LCD Contrast Features of the WS-9013U Indoor TemperatureII. Outdoor Temperature III. Minimum and Maximum Temperature Records Viewing the Indoor Temperature RecordsViewing the Outdoor Temperature Records Resetting the Mimimum and Maximum Records IV. Adding Outdoor Remote Control Senders OptionalSET-UP of Multiple Units Outdoor LCD Mounting Remote Temperature Sensor Mounting with ScrewsMounting with Adhesive Tape II. the Indoor Temperature Station Using the Table StandWall Mounting Maintenance and Care Instructions TroubleshootingTemperature measuring range SpecificationsWarranty Information FCC ID OMO-01RX receiver, OMO-01TX sensor