Fluke 54IIB, 53IIB Using the Thermometer, Changing Setup Options, Entering and Exiting Setup

Page 13

53IIB/54IIB

Using the Thermometer

Using the Thermometer

1.Plug the thermocouple(s) into the input connector(s).

2.Press  to turn on the thermometer.

After 1 second the thermometer displays the first reading. If no thermocouple is plugged into the selected input or the thermocouple is "open," the display shows:

"- - - -."

Changing Setup Options

Use Setup to change the logging interval, thermocouple type, offset, sleep mode, time, and line frequency settings.

The thermometer stores the settings in its memory. Setup settings reset only when the batteries are removed for more than 2 minutes.

Entering and Exiting Setup

When the thermometer is in Setup mode, the display shows .

•Press to start or exit Setup.

Notes

Press  or to scroll to the setup option you want to change.

Setup is disabled in MIN MAX mode.

9

Image 13

Contents 53IIB/54IIB Limited Warranty and Limitation of Liability Table of Contents 53IIB/54IIB Contacting Fluke Safety Information53IIB/54IIB Safety Information Getting Started International SymbolsComponents ComponentsDisplay Elements Display ElementsButtons ButtonsPress to freeze or unfreeze the displayed readings Changing Setup Options Using the ThermometerEntering and Exiting Setup Changing the Logging Interval Changing the Offset Changing the Thermocouple TypeSetting the Time Enabling or Disabling Sleep ModeConnecting a Thermocouple Measuring TemperaturesChanging the Line Frequency Holding the Displayed Temperatures Displaying TemperaturesViewing the MIN, MAX, and AVG Readings Using the Offset to Adjust for Probe Errors Using MemoryStarting and Stopping Logging Initial Conditions and Data EntriesViewing Logged Readings Clearing Memory Communicating with a PCSpecifications MaintenanceEnvironmental Cleaning the Case and Holster Replacing the BatteriesElectrical 80 PK-1 Thermocouple supplied with thermometerModel Replacement Parts and Accessories53IIB/54IIB