Fluke 54IIB, 53IIB specifications Maintenance, Specifications, Replacing the Batteries, Calibration

53IIB/54IIB

Maintenance

Maintenance

Replacing the Batteries

Refer to the safety information in Table 1 before replacing the batteries.

1.Turn off the thermometer if necessary.

2.Loosen the screw and remove the battery door.

3.Replace the three AA batteries.

4.Replace the battery door and tighten the screw.

Calibration

To ensure that the thermometer performs to its accuracy specifications, Fluke recommends that you calibrate the thermometer annually, starting one year after purchase.

To calibrate the thermometer, contact Fluke for the Service Center nearest you or follow the calibration procedure in the service manual listed in "Replacement Parts and Accessories."

Specifications

Environmental

Cleaning the Case and Holster

Use soap and water or a mild commercial cleaner. Wipe with a damp sponge or soft rag.

Operating Temperature

Storage Temperature

Humidity

-10 oC to 50 oC

(14 oF to 122 oF)

-40 oC to +60 oC (-40 oF to +140 oF)

Non condensing <10 oC (<50 oF)

95 % RH: 10 oC to 30 oC (50 oF to 86 oF)

75 % RH: 30 oC to 40 oC (86 oF to 104 oF)

45 % RH: 40 oC to 50 oC (104 oF to 122 oF)

19