53IIB/54IIB
Users Manual
3.Press to step through the minimum, maximum, average, and current logged reading. For example, Figure 4 shows the maximum reading in memory. The maximum reading occurred at 1:49 P.M. and was stored in memory location 5.
Communicating with a PC
You can transfer the contents of the thermometer’s memory to a PC using FlukeView Forms. The communication requires an IR (infrared) serial connection. Refer to the FlukeView Forms Installation Guide and FlukeView Help.
FlukeView Forms places the logged readings into standard (default) or customized forms. The forms also display user comments. You can use these forms to satisfy
When you send logged readings to a PC, all functions are disabled except power off, backlight, and turning off communication.
Figure 4. Maximum Reading
4.Press to stop viewing logged readings.
Note
The thermometer calculates the minimum and maximum of all logging sessions in memory.
The display shows "-
aat04f.eps
• Press , (PC/IR SEND) to toggle the IR port on and off.
The display shows:
When the IR port is enabled you can communicate with FlukeView Forms.
18