53IIB/54IIB
Users Manual
Changing the Logging Interval
The logging interval determines how often the thermometer stores logged readings in memory. You choose the length of the logging interval. See "Using Memory."
The thermometer stores logged readings at the end of each logging interval. You can select a logging interval of
1 second (1), 10 seconds (2), 1 minute (3), 10 minutes (4), or
You can also set the logging interval manually (0). Each time you press , the thermometer stores the current readings in memory.
1.Press or until the display shows INTERVAL.
2.Press to display the logging interval choices.
3.Press or until the display shows the logging interval you want, and then press to select.
4.If you selected a
•Press or until the display shows hour:min or min:sec, and then press to select.
The left two digits blink.
•Press or until the left two digits you want appear on the display, and then press to select them.
The right two digits blink.
•Press or until the right two digits you want appear on the display, and then press to select them.
Holding down or causes the number to change more quickly.
10