Fluke 189 user manual Feature Summary

Page 87

Specifications

Feature Summary 7

Feature Summary

Feature

Dual Digital Displays

Analog Bar Graph

Backlight with 2 brightness levels

Fast Autorange

AC+DC true rms, ac rms specified to 100 kHz

dBm, dBV

AutoHOLD

Continuity / Open test

	Description
Primary:	50,000 counts
Secondary:	5,000 count
Bar graph:	51 segments, updates 40 times/second

Bright white backlight for clear readings in poorly lighted areas

Meter automatically selects best range - instantly

Choices for AC only, AC and DC dual display, or AC+DC readings

User selectable impedance references for dBm

Holds readings on display

Beeper sounds for resistance readings below threshold, or to indicate a momentary open circuit

Fast Bar Graph

Duty cycle / Pulse width

MIN MAX Mode

FAST MN MX with 24-hour time stamp

Closed-Case Calibration

Battery / Fuse Access Door

Hi-Impact Overmolded Case

51 segments for peaking and nulling

Measure signal on or off time in % or milliseconds

Record maximum, minimum, and average values.

24-hour clock for MAX or MIN, elapsed time for AVG. FAST MN MX captures peaks to 250 ∝ sec.

No internal adjustments needed

Battery or fuse replaceable without voiding calibration

Protective holster features

7-3

Image 87

Contents Model 187 Lifetime Limited Warranty Table of Contents Making Measurements Model 187Iii Specifications MaintenanceList of Tables Model 187 List of Figures Viii Safety Information Before You StartContacting Fluke WWarning Safety InformationBefore You Start International Electrical Symbols SymbolsGetting Acquainted IntroductionTurning the Meter On Automatic Power Off Battery ConsiderationsAutomatic Backlight Off Low Battery IndicationRotary Switch Rotary SwitchPushbuttons PushbuttonsBlue Key Function Rotary Switch Selections Position Rotary Switch FunctionView MEM Rotary Switch PositionsButton Pushbuttons Yellow Button Description Function Yellow Button Function Pushbuttons Button DescriptionSelecting the Range Understanding the DisplayPrimary Display Secondary Display Bar GraphDisplay Features Number Feature Display Features Description 8.8.8 Display Features NumberDisplay Features Description Number FeatureFMS8888 HM8888 8.8 Display Features Number 51000Input Terminals Using the Input TerminalsDisplay Hold and AutoHOLD Using Display HoldUsing MIN MAX Using AutoHOLDModel 187 Min Max Avg Using Fast MN MXUsing Hold with MIN MAX or Fast MN MX Using Relative Mode RELMeasuring Voltage Making MeasurementsAC Voltage Measurement Measuring AC VoltageDBm Display DB Measurements in AC Volts FunctionsBoth AC and DC Voltage Measurements Measuring DC VoltageAC and DC Display AC over DC DC over ACCapacitors before measuring resistance Measuring ResistanceOFF Automatically subtract this value Testing for ContinuityUsing Conductance for High Resistance Tests For in-circuit tests, turn circuit power off Conductance Measurement Measuring Capacitance Capacitance Measurement Testing DiodesDiode Test Measuring Temperature Shock, do not connect the thermocouples toElectrically live circuits Input Ranges Measuring CurrentMeasuring Current Input Alert FeatureFollowing are some tips for measuring current Measuring AC Current11. AC Current Measurement Measuring DC Current Current through one component Total current to circuit13. Functions Allowing Frequency Measurement Measuring Frequency14. Hz Display Measuring Duty CycleMeasures Negative Pulse Measures Positive Pulse16. Duty Cycle Display Measuring Pulse WidthStart and Stop on Negative Slope Start and Stop on Positive Slope18. Pulse Width Display Model 187 Logged Readings Memory Using Memory & Communications FeaturesTypes of Memory Saved Readings MemoryStoring Saved Readings Starting LoggingStopping Logging To avoid electric shock, disconnect the test Viewing Memory DataMEM View DisplayClearing Memory Using Communications 187Model 187 Selecting Setup Options Changing the Default SettingsOption Function Specific Setup SelectionsFactory Default PreconditionChoices Common Setup SelectionsAdjusting the Temperature Offset Changing the Default Settings Setting the Power Off Timeout Selecting Display Resolution 3 1/2 or 4 1/2 DigitsSetting the Line Main Frequency Setting the 24-Hour ClockSaving Setup Options Returning to Factory DefaultsMaintenance Introduction General MaintenanceTesting the Fuses Replace F2 if Replace F1 if Displayed Replacing the Batteries Battery and Fuse Replacement Replacing the Fuses User-Replaceable PartsCase of Difficulty MP8 MP9 Safety and Compliances SpecificationsPhysical Specifications Feature Summary Basic Specifications Detailed Accuracy Specifications KHz-100 kHz Accuracy Function45-1 kHz 20 kHzDC a 500.00 Ω Capacitance Diode Test MIN MAX AVG Burden Voltage A, mA, µA Frequency Counter SensitivityInput Characteristics