Fluke 189 user manual 500.00 Ω

Page 92

Model 187 & 189

Users Manual

Function

Resistance 1

Conductance

Range

500.00Ω

5.0000 kΩ

50.000 kΩ

500.00 kΩ

5.0000 MΩ

5.000 MΩ up to 32.000 MΩ

32.0 MΩ up to 50.0 MΩ

50.0 MΩ up to 100.0 MΩ

100.0MΩ up to 500.0 MΩ

50.00nS

Resolution

0.01Ω

0.0001 kΩ

0.001 kΩ

0.01 kΩ

0.0001 MΩ

0.001 MΩ

0.1 MΩ

0.1 MΩ

0.1MΩ

0.01nS

Accuracy

0.05 % + 10 3

0.05% + 2

0.05% + 2

0.05% + 2

0.15% + 4 2

1.0 % + 4 2

3.0 % + 2 4

3.0% + 2 4

10.0 % + 24

1 % + 10

1.For the 5,000 count mode, divide the number of least significant digits (counts) by 10.

2.For relative humidity greater than 70 %, resistance accuracy is 0.5 % over 1 MΩ and 2.5 % over 10 MΩ.

3.Using relative mode (REL Δ) to zero residual reading.

4.To ensure stated accuracy, switch to conductance mode and verify that the open circuit reading is less than 0.10 nS.

7-8

Image 92

Contents Model 187 Lifetime Limited Warranty Table of Contents Model 187 Making MeasurementsIii Maintenance SpecificationsList of Tables Model 187 List of Figures Viii Contacting Fluke Safety InformationBefore You Start Safety Information WWarningBefore You Start Symbols International Electrical SymbolsTurning the Meter On Getting AcquaintedIntroduction Battery Considerations Automatic Power OffLow Battery Indication Automatic Backlight OffRotary Switch Rotary SwitchPushbuttons PushbuttonsRotary Switch Selections Position Rotary Switch Function Blue Key FunctionRotary Switch Positions View MEMButton Pushbuttons Yellow Button Description Function Pushbuttons Button Description Yellow Button FunctionPrimary Display Selecting the RangeUnderstanding the Display Bar Graph Secondary DisplayDisplay Features Number Feature Display Features Description Display Features Number 8.8.8Number Feature Display Features DescriptionDisplay Features Number 51000 FMS8888 HM8888 8.8Using the Input Terminals Input TerminalsUsing Display Hold Display Hold and AutoHOLDUsing AutoHOLD Using MIN MAXModel 187 Using Fast MN MX Min Max AvgUsing Relative Mode REL Using Hold with MIN MAX or Fast MN MXMaking Measurements Measuring VoltageMeasuring AC Voltage AC Voltage MeasurementDB Measurements in AC Volts Functions DBm DisplayMeasuring DC Voltage Both AC and DC Voltage MeasurementsAC over DC DC over AC AC and DC DisplayMeasuring Resistance Capacitors before measuring resistanceOFF Testing for Continuity Automatically subtract this valueUsing Conductance for High Resistance Tests For in-circuit tests, turn circuit power off Conductance Measurement Measuring Capacitance Testing Diodes Capacitance MeasurementDiode Test Electrically live circuits Measuring TemperatureShock, do not connect the thermocouples to Measuring Current Input RangesInput Alert Feature Measuring CurrentMeasuring AC Current Following are some tips for measuring current11. AC Current Measurement Measuring DC Current Total current to circuit Current through one componentMeasuring Frequency 13. Functions Allowing Frequency MeasurementMeasuring Duty Cycle 14. Hz DisplayMeasures Positive Pulse Measures Negative PulseMeasuring Pulse Width 16. Duty Cycle DisplayStart and Stop on Positive Slope Start and Stop on Negative Slope18. Pulse Width Display Model 187 Using Memory & Communications Features Types of MemorySaved Readings Memory Logged Readings MemoryStopping Logging Storing Saved ReadingsStarting Logging Viewing Memory Data To avoid electric shock, disconnect the testView Display MEMUsing Communications 187 Clearing MemoryModel 187 Changing the Default Settings Selecting Setup OptionsFunction Specific Setup Selections Factory DefaultPrecondition OptionCommon Setup Selections ChoicesAdjusting the Temperature Offset Changing the Default Settings Selecting Display Resolution 3 1/2 or 4 1/2 Digits Setting the Power Off TimeoutSetting the 24-Hour Clock Setting the Line Main FrequencyReturning to Factory Defaults Saving Setup OptionsTesting the Fuses MaintenanceIntroduction General Maintenance Replace F2 if Replace F1 if Displayed Replacing the Batteries Battery and Fuse Replacement Case of Difficulty Replacing the FusesUser-Replaceable Parts MP8 MP9 Specifications Safety and CompliancesPhysical Specifications Feature Summary Basic Specifications Detailed Accuracy Specifications Accuracy Function 45-1 kHz20 kHz KHz-100 kHzDC a 500.00 Ω Capacitance Diode Test MIN MAX AVG Frequency Counter Sensitivity Burden Voltage A, mA, µAInput Characteristics