1General Description
| 1 | OMEGASCOPE® | 2 | ||
|
|
|
|
| 3 |
| 10 | LCK | HAL | LOBAT | 4 |
| ATC | LAL | PRN °F °C | ||
|
|
|
|
| 5 |
|
|
|
| ® |
|
| 9 | FUNC | LOCK | 6 | |
|
|
| |||
Figure | 8 |
|
|
| 7 |
Display and | F |
|
| ||
Keypad View |
| C |
|
|
|
Table |
|
| 11 |
| |
Key | Description |
|
|
| |
➀Display Mode displays one of the following:
E (Emissivity) | AVG (Average Temperature) |
d_F (distance in Feet) | HAL (High Alarm Setpoint) |
d_M (Distance in Meters) | TC (Thermocouple Input) |
LSR (Laser either flashing or continuous) | LAL (Low Alarm Setpoint) |
MAX (Maximum Temperature) | AMB (Ambient Target Temp) |
MIN (Minimum Temperature) | PRN (Send Data to PC) |
dIF (Differential Temperature) | MEM (Store Individual Temperature Data) |
LOG (Log Temperature Data) |
|
➁Data associated with one of the Display Modes
➂Backlighting Icon - allows the display to be viewed under low ambient light
➃Displays the units of measure in either °F or °C
➄Main display - displays the current temperature
➅Locks the trigger / Enables or Disables alarms/Resets MAX, MIN, Dif, Avg. Temps
➆
for incrementing data; and is for turning on/off the display backlighting
➇C F 
for decrementing data; and is for changing the units of measure from °F to °C or vice versa
➈Function key for scrolling through the display modes
➉Display Icons
|
| Trigger Lock |
| Low Alarm |
|
| Ambient Target |
| Low Battery |
|
|
| ||
|
| High Alarm |
| Data Transfer thru |
|
|
| ||
RS232 |
|
| ||
|
|
|
|
|
Laser Power Indicator LED |
|
| ||