Omega Speaker Systems OS534E, OS532E, OS524E, OS530LE, OS53xE-CF, OS530HRE, OS523E, OS533E manual Problem

Page 60

Troubleshooting Guide 7

Problem

Solution

The temperature reading is erratic. The thermometer has just been moved from one extreme temperature to room temperature [0°C or 50°C (32°F or 122°F)] or vice versa.

1.The thermometer has to stabilize before taking temperature measurements. It takes up to 30 minutes for the thermometer to stabilize.

The temperature reading is erratic. The thermometer has just been moved from room temperature (ambient temperature) to a temperature 10°C colder or warmer.

1.The thermometer has to stabilize before taking temperature measurements. It takes up to 20 minutes for the thermometer to stabilize.

No Laser Beam	1.	Make sure the trigger is pulled
		and the laser power switch is
		turned on. (The red power LED
		should be lit).

The Laser "line of sight"	1.	The line of sight and the center
does not coincide		of the target are offset by design.
with the center of the		(refer to Figure 3-4 and the
target.		explanation above it for how
		to compensate for this).

☞

7-3

Image 60

Contents User’s Guide Servicing North America Unpacking Instructions Accessories Page Unpacking Instructions Chapter General Description Chapter Digital Video Camera General Description Introduction OS530LE OS530HRE OS530LE-CF OS533E-CF OS534E-CF Features OS523E OS524E Parts of the Thermometer Front of the Thermometer Display Details Key General Description General Description Ac Power Operation Installing the BatteriesOperating the Thermometer Field of View PositionsField of View OS534E, OS523E-1 Field of View OS53xE-CF Field of View OS523E-3 Measurement Techniques 11 Recorder Hookup Real Time Mode Active Operation 12. General Operational Block DiagramReal Time Modes 13. Visual Function Flow Chart Adjusting Emissivity Using the Lock FunctionUsing the Trigger Function Using the Distance Function Must be hard, flat, and reflective to ultrasonic pulseDS = 17. Field of View of Distance Meter HH-DM Calculating Temperature Values Laser Sighting StatusChanging the Temperature from F to C or vice Versa Turning on the Display BacklightingThermocouple Input OS532E, OS533E, OS534E Using the Alarm Functions To set the low alarm value OS533E, OS534E, OS523E, OS524E Use the Ambient Target Temperature Compensation MB RAM Sending temperature data to PC in Real Time Download Stored Temperature data to PC Communicating through Hyper terminalMenu Description Using the Handheld Infrared Thermometer PC Interface Commands AsciiString Description Storing Temperature Data on Command OS534E, OS523E, OS524E Logging Temperature Data in Real Time OS523E, OS524E,OS534E Erasing the Temperature Data from Memory Recall Mode Passive Operation ModeRecall Modes Reviewing the Last Parameters Laser Sighting Description Right Side ViewTwo Laser Configurations Operating the Laser SightingLines of Sight of the Laser Sighting and Thermometer Installing and Operating the Sighting Scope Sighting ScopeInstalling the Sighting Scope Battery Installation Digital Video Camera Camera PartsTurning Camera ON/OFF Menu SelectionDigital Video Camera Safety Warning Maintenance Replacing the BatteriesCleaning the Lens Calibrating the ThermometerServicing the Laser Sighting Troubleshooting Guide Problem SolutionTroubleshooting Guide Problem Troubleshooting Guide Specifications are for all models except where noted SpecificationsGND With Built-in Distance Module Laser Sighting Digital Video Camera Specifications Glossary of Key Strokes Glossary of Key Strokes Thermal Radiation Appendix How Infrared Thermometry Works aBlackbody Calculating Temperature Optics Field of View Metals Appendix Emissivity ValuesNonmetals Appendix Determining an Unknown Emissivity Figure C-1. Determining Emissivity Figure C-2. Determining Emissivity with a Drilled Hole Appendix Determining an Unknown Emissivity Index Field of View Diagrams Recall WARRANTY/DISCLAIMER Shop online at omega.com PH/CONDUCTIVITY