Omega Speaker Systems OS534E, OS532E, OS524E, OS530LE manual Erasing the Temperature Data from Memory

Page 44

Using the Handheld Infrared Thermometer 2

2.3.16 Erasing the Temperature Data from Memory

The user can erase all 800 temperature data points in memory at any time by using the following procedure:

1.Pull the trigger and press the LOCK key. The icon will appear.

2.Press the FUNC key until reaching the MEM or LOG disply mode.

3.Press the then LOCK keys in rapid sequence. The display shows ERASE on the top and it will beep to indicate that the stored data is erased.

NOTE

Erasing the temperature data does not erase or reset Emissivity, High and Low Alarm setpoints, printing interval and Ambient Target Temperature compensation

4.After all data is erased from memory, double click trigger to unlock the trigger.

2-29

Page 43 Page 45
Image 44
Page 43 Page 45
Contents User’s Guide Servicing North America Unpacking Instructions Accessories Page Unpacking Instructions Chapter General Description Chapter Digital Video Camera General Description Introduction OS530LE OS530HRE OS530LE-CF OS533E-CF OS534E-CF Features OS523E OS524E Parts of the Thermometer Front of the Thermometer Display Details Key General Description General Description Ac Power Operation Installing the BatteriesOperating the Thermometer Field of View PositionsField of View OS534E, OS523E-1 Field of View OS53xE-CF Field of View OS523E-3 Measurement Techniques 11 Recorder Hookup Real Time Mode Active Operation 12. General Operational Block DiagramReal Time Modes 13. Visual Function Flow Chart Using the Trigger Function Adjusting EmissivityUsing the Lock Function Using the Distance Function Must be hard, flat, and reflective to ultrasonic pulseDS = 17. Field of View of Distance Meter HH-DM Calculating Temperature Values Laser Sighting StatusThermocouple Input OS532E, OS533E, OS534E Changing the Temperature from F to C or vice VersaTurning on the Display Backlighting Using the Alarm Functions To set the low alarm value OS533E, OS534E, OS523E, OS524E Use the Ambient Target Temperature Compensation MB RAM Sending temperature data to PC in Real Time Download Stored Temperature data to PC Communicating through Hyper terminalMenu Description Using the Handheld Infrared Thermometer PC Interface Commands AsciiString Description Storing Temperature Data on Command OS534E, OS523E, OS524E Logging Temperature Data in Real Time OS523E, OS524E,OS534E Erasing the Temperature Data from Memory Recall Mode Passive Operation ModeRecall Modes Reviewing the Last Parameters Laser Sighting Description Right Side ViewTwo Laser Configurations Operating the Laser SightingLines of Sight of the Laser Sighting and Thermometer Installing and Operating the Sighting Scope Sighting ScopeInstalling the Sighting Scope Battery Installation Digital Video Camera Camera PartsTurning Camera ON/OFF Menu SelectionDigital Video Camera Safety Warning Maintenance Replacing the BatteriesServicing the Laser Sighting Cleaning the LensCalibrating the Thermometer Troubleshooting Guide Problem SolutionTroubleshooting Guide Problem Troubleshooting Guide Specifications are for all models except where noted SpecificationsGND With Built-in Distance Module Laser Sighting Digital Video Camera Specifications Glossary of Key Strokes Glossary of Key Strokes Thermal Radiation Appendix How Infrared Thermometry Works aBlackbody Calculating Temperature Optics Field of View Metals Appendix Emissivity ValuesNonmetals Appendix Determining an Unknown Emissivity Figure C-1. Determining Emissivity Figure C-2. Determining Emissivity with a Drilled Hole Appendix Determining an Unknown Emissivity Index Field of View Diagrams Recall WARRANTY/DISCLAIMER Shop online at omega.com PH/CONDUCTIVITY
Top Page Image Contents