Lifescan Blood Glucose Monitor manual Important Test Strip Information

Page 10

IMPORTANT TEST STRIP INFORMATION

One TouchTest Strips are sensitive to heat and light. Keep them sealed in the origi- nal vial and store in a cool, dry place below 30ºC (86ºF). Do not refrigerate or place in direct heat or sunlight.

DO NOT use One Touch Test Strips beyond the expiration date on the vial.

DO NOT use One Touch Test Strips with plasma or serum samples, as the results will not be accurate. The strips are intended for use with fresh whole blood or One TouchNormal Control Solution.

When you open a new vial of test strips, record the date vial first opened. Discard unused test strips four months after first opening the vial.

DO NOT use One Touch Test Strips that are bent, torn, cut, or changed in any way.

Use each test strip immediately after removing it from the vial.

Replace the test strip vial cap immediately after removing a test strip from the vial. Close cap tightly.

Do not transfer the test strips from the original vial to any other container.

Do not carry unwrapped test strips in your meter case.

DO NOT use bleach, or products containing bleach, near the test strips.

For reliable results, use only One Touch Test Strips made by LifeScan.

9

Image 10
Contents Owner’s Booklet Page Table of Contents Solving Problems Introduction Precautions and Limitations ONE Touch Profile Blood Glucose Meter Page ONE Touch Test Strips Important Test Strip Information Coding the Meter Setting the SystemTurn on the meter Match the Code Numbers Code the MeterCheck Strip Test Insert the check strip Remove the check strip Turn the check strip over and insert it back into the meter Important Check Strip Information Control Solution Test Do a control solution testImportant Control Solution Test Information Use only One Touch Normal Control SolutionInsert a test strip Apply control solution Result appears within 45 seconds Testing Your Blood Detailed Test ProcedureGetting a Drop of Blood Never share a lancet with another personAdjust Puncture Depth Cock the Penlet Plus Sampler Wash Your HandsGet a Drop of Blood Helpful tipsPage Remove the Lancet Cleaning the Penlet Plus Sampler STEP- BY- Step Test Procedure CodeWait Not Enough Blood Retest Apply blood to the test spotRemove the test Strip from the meter Accurate results in 45 seconds Do YOU Event Labelling To select an event label, press the C but Using the Meter Memory Entering the MemoryNodata Recalling ResultsInterm Changing Meter Settings Entering the SET-UP Options ModeOFF OFF Beep Prompts900AM Time and DateEvent Averaging Insulin Prompt Change the insulin typeInsulin Programming Change the insulin units000 Carbohydrate CountingDisplay Language Time Format Date FormatComma Decimal SeparatorExiting the SET-UP Mode Unit of MeasureSolving Problems Test Procedure MessagesSide Check Ketones CALL. DR Test Ketones Error Messages Message Problem What to doClean Error Not Enough Blood Retest Message Problem Redo Taking Care of Your Meter Cleaning the Meter Remove the test strip holder from the meterClean the test area Replace the Test Strip Holder Replacing the Batteries BATTRY` Replace NOW Insert the new AAA batteries into the battery compartment Remove the old batteriesSpecifications Performance CharacteristicsWarranty Five-Year WarrantyInsulin Types Units will Advance on the Display AS Follows1995 IFD/OB/OTP
Related manuals
Manual 89 pages 5.76 Kb